goodies

In the detroit area go kart frame mini bike alsport trike

Vintage Taco Mini Bike Minibike Original Condition as Purchased in 1975 | eBay Flip the tank around the way is should be, install a 2 stroke, sell off the taco guard and chrome clinton to help offset the cost :drool: Be interesting to see what numbers it pulls considering what some of them...

Small load this time but some goodies.

Here I have some items to pass on to the next builder... - Spocket spacers: 1/4" ID x 1 7/8" $5.00 plus shipping - New Renegade grips: 7/8" bars red. $20.00 plus shipping - New Renegade grips: 1" bars red...

Got this engine on a Rupp I bought. I started to prove that it runs. That is the extent of my knowledge in it. I verified it has an ARC adjustable billet flywheel, MSD coil, two stage pipe and intake port work. The seller TOLD me it has a billet rod and upgrade valve springs. I did not verify...

8 degree flywheel key advance gx140 e-tube .037 main jet honda choke velocity stack with choke hold already drilled k&n filter to work with stack new header honda long studs and nuts to make it all work some extra parts I have laying aside 75$ shipped you'll notice more power...

Fresh and ready flatty New rings New valves New chrome piston (std) New Mikuni 22mm New dbl valve springs w/ locks and retainers ARC rod (3.875) used w/ new bearing ARC adj flywheel (used but excell cond, w/ new hub bolts) bearing side cover (new bearing) milled head nice cam (265...

Anybody make any billet rods ? I want to make a little more power but dont wanna risk my og super bronc motor.

Honda gx-390 block. NEW with milled prongs and a nice welded plate to connect the crankcase to the jug 88mm bore. Arias piston with a 16mm performance pin NEW Billet long rod. length is 4.843 NEW 410 lift cam NEW-precision Billet sidecover with a roller bearing for the cam NEW its a parsons...

Honda GX200/ 6.5 spares. These will fit china clones too. Removed from a perfect running engine, (was hopped up). All parts genuine Honda unless noted: Flywheel and coils are clone, Throttle is from a minibaja and has integral kill switch. Stud kit in bag is NR racing, for the side cover...

Anyone have extra of this stuff?I know can get all this from akg but there $$ 18 # springs 1.2 rockers Laser cut guide plate uni filter to fit a 22 mm slide carb mikuni main jets 120,125,130 pilot jet 12.5 let me know what ya got,Im in RI thanx JF