lifters

So I am getting to the point soon were I will be buying lifters for the clone I am building and see that the 160 lifters are a little lighter. I also noticed that the lifters are only guided by the block with no inserts so its straight on aluminum. Guessing the lifters are shorter and am...

Anybody still making billet lifters for the hemi predator smallenginescams and nrracing have been out of stock for awhile.

Hello everyone. I have a 212old style. Getting ready to order parts, im taking out my governor so I'm going to get a fly wheel rod a cam new springs push rod lifters and maybe rockers. The only thing is I don't know which to get. They all have different specs and I don't want to get the wrong...

good used 14cc head . just needs a good cleaning . complete stock head $50.00 shipped i will throw in stock flat top piston (has 3 dings on the face but should be fine ) lifters,stock rod,push rods,stock cam if you want those aswell:thumbsup:

All the websites want an arm and a leg and I was hoping someone on here wouldn't mind sending me (2) 6.5hp lifters. I'll give you $10 for it all. Message me please Much appreciated SJ

I have heard of something having to be done to the lifter area when using billet lifters, what has to be done? and would I have to do any mods at all if I am using stock length billet lifters? and at what point should you use billet lifters? :shrug: Thanks.

Looking for a set of stock 5 hp Briggs lifters.

I need a set of extended lifters for a custom ground crank for my H70...Does anyone know if any bigger Tecs like an hh120 has the same stem diameter and if they are longer than the h70s?? if I can't find a longer set the next step will be welding the tips of these and turn them down... I'm also...

anyone have a set of used but still useable stock length billet lifters they can sell me for a decent price? I'd like to avoid spending the extra 30 bucks for new ones if I can. maybe I just haven't found the right site? :shrug:

Well the time is coming for me to follow through and prepare for rebuilding my Raptor 3 engine with some high performing and reliable parts. I already have my mind set on an ARC billet flywheel, billet con rod, and the Dyno 94SS cam. Now where I am running into issues is finding a set of 20...

I was wondering will Gx200 lifters work in a Gx160? I had ordered a set of replacement lifters and forgot they were different sizes. If I use them what all will need to be modified or changed to accommodate them?

looking for the part # for a hs40 cam lifter any help is appreciated thanks

looking for new or good used 356 cam for an animal or wf, also need billet lifters and heavy dbl spring kit..

new never run 107ss cam for 5hp flathead $70+ship New never used 1.700" billet lifters flathead $15 shipped

hey guys i have about 150 sets of billet lifters for the 5 and 4hp flathead 10.00 per set. also have 20+ raptor 2 and 3 rods new in the box. say 5.00 a rod :thumbsup:

I'm setting up a 94ss cam, and I've got .018" valve lash. This cam calls for .006", so I need some longer lifters. Does anyone make them in varied lengths, or do I have to buy the set that are .100" longer and grind them down? If so, can they be ground down by hand or will they need to be put...

please let me know if you have a set to give up. thanks

I just installed the crank, flat top piston, and billet rod today. I was about to install the cam when I noticed that the two lifters appear to be different looking. One lifter has an H (Honda?) on the back side of its head and the other has no markings. Do I have mismatched parts (one Honda...

would it be 18 lb springs for this size? Would I notice a difference in performance? what about rockers, would different ones give me a "chop" type sound, like with a radical cam?