Can any one send me a link to a wright up on modifying the stock rocker arms for more lift. I searched quiet a bit last night and did not find anything. I know the kart racers do this some times to stay in spec. I already have a set of champions for my race motor and am going to be getting a set...
Ordered the champion shaft rockers today. Are they a full bolt on or do I need to machine the head at all? There going on a UT2 160 head. Am wondering if the rocker stud boss needs machined down at all or machined flat.
Will adding these rockers increase my torque. If so at what RPM range should I expect more torque. I have done a few mods like installing high flow air filter Robertsons torque tube 18 pound valve springs Billet flywheel rejetting carburetor and removing governor. After hunting season I will...
Does come with the original OHV valve cover and valve cover gasket.
Valve cover bolts not included.
I do have the stock short pushrods for it if needed.
Just installed a set of NR's chrome moly roller rockers a few days ago, im having issues with push rods. I have my head deacked .060 and have already been running shorter rods to compensate. Had to have shorter yet after installing the new rockers, went down to a 5.26" rod, but im only getting...
Hi guys I'm new to this forum and if someone could help me out that would be great,
I have a gx200 clone and I'm ready to install a bmj cam, and want to know if I can run 1.3 stamped rocker with 26lb springs with out any problems? Or could I run it with stock rockers and 18lds springs? I would...
Looking for a set of roller rockers. I'm doing a pretty nice size build and i figured if i could find a decent used set to save a little cash would be great. if anyone has such thing let me know. thanks guys.
I have a gc160 head that has 1.3 rockers and 26lbs sorings, I think rockers are hitting valve cover. I dont have enough space to put a spacer so. Can I remove the baffle inside? If so how can I make sure oil doesnt leak out breather hole?
Billet Aluminum Hemi Rockers
I hope I'm not violating any rules, but if any of you would like more info about acquiring a set of these please email me at brad@bradhillperformance.com
Billet 7075 1.2 ratio rockers for the Hemi head.
https://youtu.be/hpurZrUpTAc
Link for my predator I built, in the video it's spinng the heavy propshaft or it would rev quicker. I'll be trying it out soon at the lake, still waiting on my champion rockers and valve cover. Thanks for the help guys, I'll probably build my boys minibikes soon...
I'am building a hemi predator with RTC 6 head , it's getting a dyno 308 cam . With this cam and rockers what would my lift be . I have no idea how to figure it out .
Next ?? Will this be too much lift for this set up ?
Next ?? I'am also building a red clone with a black mamba and champion...
Hello everyone. I have a 212old style. Getting ready to order parts, im taking out my governor so I'm going to get a fly wheel rod a cam new springs push rod lifters and maybe rockers. The only thing is I don't know which to get. They all have different specs and I don't want to get the wrong...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.