set

Really nice set of 6" gopowers wheels and 60 tooth sprocket . Wheels were bead blasted and cleared $175 shipped pic upon request text 845-505-2198

I am working on a rebuild of a Fox Thunderbolt. The bike was a basket case with the jackshaft pieces in a bag. Which way do the bearings install? From the outside or the inside? There is a spacer bushing that I think went under the frame to space the sprocket away from the frame. I have a...

Front and rear fenders. Great shape. No cracks. Plus fork plate plastic. $45 shipped for all of it. Will not separate

Pulled this set of 4" wheels off from a Lil' Indian frame a while back. Thought I might be able to use them at some point, but I'd rather have the dough instead. Front wheel still has the original DIH Carlisle tire on it, in decent condition. This is the wide tire. Looking to get $80 plus...

I have a gx200 with 70mm wiseco piston,f275 cam,1.2 rollers, big valve head,12.5 compression, race gas,28mm mikuni, I dont know where my peak torque is on my motor do I have to get it dyno to find it I put the motor together, motor runs great now.does anybody have this set up and might be able...

I'm looking on how someone would convert a left handed westbend into a right hand westbend. Are you able to make the conversion or does it take a another whole motor that is a right handed engine?

Like the title says. I have a set of 3 nos chromed cat wheel stars. $125 shipped for the set. Will not separate

I got the motor all cleaned up repainted, removed carbon build, grinded out a key way for the clutch, threaded the shaft to drop in a bolt but now I'm a bit stuck. I have no clue how to properly set the throttle or if I need all the linages and spring that are on there already any help would...

Using a movers dolly I mounted 2 (2x6's) to it and used conduit straps to secure the frame to it. Works great, is stable and moves out of the way. I'm sure there are better set ups but this works for me. Thought I'd share.

Real deal bonanza 8" spinners with street tread tires. Tubes are both good. 60t bonanza sprocket and 5" bendix brake. Only one bad spot on front wheel but still completely usable. $250 shipped

4" one piece steel wheel set, chips and scratches in thin paint but never put into service, standard bearing size 1 3/8" hub diameter. Front has 4 3/4" spacing, rear has 7" total with space to shorten if needed. #35 chain 60 tooth count $20 plus shipping, looking like around the $15+ or...

trying to get this bike rideable,dont care about correct bars or name brands. they dont need to be spiffy,just not bent and the same design. note how tall they are,not the halfass bar but the real one. this is how i got it. thanks in advance.

It's supposed to read 424, my dyslexia kicked in typing the title and I didn't catch it before I hit enter. I've searched fleabay, done a few google searches, and quickly looked around here but is there a place where I can just get a sticker set for a montgomery ward 424? Was hoping I could...

looking for a set of comet speed limiting weights for the driver on a 30 series. used, new doesnt matter. thanks

These things look awesome!! Motorcycle Handlebar for 7 8" Riser 7 8" 22mm Diameter Free Width Angle Modify | eBay

$125 plus shipping on can bring to windber.

Ok, I'm hoping someone has had this challenge. I can't find a rear wheel for my kids DB30S -- serial number starts with the LUAH... What / How did anyone come up with a work around? Thank you in advance for your knowledge and advice. Jeff

Up for sale is a set of bonanza MB series NOS fenders. I had a few sets of these and these are the last set with good chrome. The rear fender do es have some rust for sitting in storage. $100 plus shipping.

I picked up these pieces separately, but they're made for each other. The Jackshaft 2 speed looks NOS, new teeth, everything looks great. The clutch is used but the shoes have lots of life left. Nothing is stuck. The inside of the clutch has slight pitting on one side, but I doubt it would...

Good aluminum backing plate and nos steel stamp plate. Everything for $125 shipped