settings

Well its been a while but I have myself a new Baja Racer. I'm keeping the stocker engine for a bit (groan if you must) so I'm trying to get it running tip top. I rebuilt the carb and have been fiddling with the idle circuit screw (I have the Huayi adjustable carb.) it seems to run ok between 1.5...

Hi, Anyone by chance have a PDF repair manual for a sears/tecumseh 143.754042 H35-45592R Thinking of rebuilding but also need torque settings. Thanks in advance.

I put a tilly hl304wxa on a modified clone and it doesn't have good bottom end response.I have tried different fulcrum and popoff settings.

Heald Tecumseh 8hp Carburetor settings

somebody told me a while ago, but for the life of me, i cant remember, nor could i find it in the search, so i have a carb, the stocker from an HS-40 mounted on a briggs 5hp, whats the stock settings on it? it never ran right before, so i did a carb rebuild and i want to try it again with...

i have a rupp hustler with an hs 40, i beleive its too lean becayse it stopped running and its a real bitch to pull, so its partly seized or what? so i need the air/fuel mix screw, the screw for the bottom of the float housing and any other screw i need to sets # of turns from snug, thanks,