slop

Guys...I noticed that the chain on my son's Coleman CT100U has too much slack and it banging against the chain guard while riding, especially when riding over bumps. At this point I've adjusted the tensioner and when that didn't work, I moved the engine forward. I still have more slack than...

Hey Fellas and Gals, I have a mini I am working on that has been ID'd as a Joe type... When I was taking off the forks/handlebars and I was surprised when I didn't see any bearings in the neck tube. Is this normal? The neck tube has a 9/16" ID. And the bottom handle bar cross bracket...

I have a Bonanza 1300 that has an incredibly loose fork. I replaced the bushing already. I have measured out the bolt hole in the top plate of the fork where the head bolt goes and it seems to be worn out a little bit. It measured out to .654 where the bolt measures out to .622. I have...

I have a Bonanza BC1100 and have noticed alot of slop in the steer tube area in the front end. Its tight but it has alot of back to front slop. Does anyone else have this problem? I also have a problem with the front suspension. The springs dont move and i have tried to take them out of the...

I have a Bonanza BC1100 and have noticed alot of slop in the steer tube area in the front end. Its tight but it has alot of back to front slop. Does anyone else have this problem? I also have a problem with the front suspension. The springs dont move and i have tried to take them out of the...