work.

we tried JB weld on my tank and it stayed dry for awhile. I rode it a few times and it started to get damp again and a few drips now and then....i really do not want to ruin the paint on the tank....any other ways to stop a leak in a tank? I thought someone said there is a coating for the inside...

If this is in the wrong section, Hent/ a Mod please move it. I'm currently disabled and not able to work on my clone, I do not want to let my father work on it, especially after he broke a bolt to the ARC rod which is bad, seeing as they are not available without buying a new rod. I am asking...

My go kart has a Modified clone motor on it. The oil sensor is removed so unhooked the oil sensor box on the outside of the motor. Then i just have a straight connection from the thick black wire to the kill switch but it wont turn off. I need help. If this setup is wrong then i have no problem...

Ok.I realize it's not pretty.But it runs like the wind and pulls like an ox. I managed to mount the 5.5hp clone to the frame,but the drive chain to the jackshaft was too loose.The engine can't move and I had no half-links.But a DB30 tensioner worked nicely. I used an old piece of cast iron...