I'm new to this site, but I've gotten alot of help just by reading. But I can't get my 5hp briggs on my 70's minibike to run properly, I've cleaned out the carb, put new gaskets and a new diaphram in, and I've replaced the spark plug. The problem is, to get it running at all, I have to have the choke completely closed. If its open at all it just stalls, it should be the opposite right? It won't rev up without stalling but it idles fine with the choke closed, I've been trying to figure it out all day, it's my first minibike so I'm a little new at this and any thoughts at all would be greatly appreciated. thanks