MustangFrank helped with dimensions. His bonanza light had holes around 1-7/8 back from the shrouds and located around 12 and 2:00. I drilled mine around 12 and 1:30.
This kit was from R21 and he provided stick toggle switches, I ordered ball end switches from ebay instead. I didn't look too hard but both are on off meaning when the high beam is on the low beam is on too. I'll either look for a SPDT switch or install a relay..... one day.
This kit was from R21 and he provided stick toggle switches, I ordered ball end switches from ebay instead. I didn't look too hard but both are on off meaning when the high beam is on the low beam is on too. I'll either look for a SPDT switch or install a relay..... one day.