Alright everyone here it goes ,I have A concern issue on my clone. I have the .256 not modified AGK cam, billet retainers, 18pd springs, stainless valves, chrome molly push rods And stock rockers for the moment, because with the 1.2 rockers, and that lift ratio .265 gives me .318 which is for sure COIL BIND. with the same cam and the stock rockers, I can get a feeler guage in the springs with still .007" with no coil bind but close .Does anyone know if this is an acceptable number at a high RPM? Or should I get the 26pd springs, that way I could use my 1.2 rockers as well with no binding issue at all. Or stay with stock rockers? Any help, or input on this would be greatly appreciated :doah::doah::doah: Thank You Bandit 40.......