DB30S Seat problem (Bolts)

[Riderforlife]

Hello there. I have a db30s, and I have a problem with my seat
one of my nuts in my seat came loose and came out of the seat. Now I cant bolt the seat down at the front. Is there any way I can get the bolt back in there and secured to mount the seat again? Thanks

 

[jdogg]

I would take some of the seat staples out and fix the nut and then re-staple! If the nut ripped through the plastic you may have to use a fender washer under the nut....

 

[Riderforlife]

This makes sense and will try it out, will let you know how it goes!
Thanks

 

[PennsyDutchman]

Depending on the age of the seat (when made) it may not be a nut. Take a few staples out superglue an appropriate nut in place of the missing threaded insert and after replacing staples put a star washer on the bolt just hand tighten to snug it up. A drop of blue lock title will keep it from working loose but you can still remove the bolt.