Is the flexible exhaust pipe still available somewhere? Or a way to tighten flex pipe on both 2" nipple eng side & other end to muffler, both are really loose and exhaust fumes coming out from them. The heathkit manual says it's a tight fit and has to be twisted on.
I tried exhaust tape on both sides. After 10 minute ride the tape on muff side burnt and came undone, the manifold side seems ok but after a longer ride will probably come off.
Also tried muffler putty when I first put eng back together and flex pipe was loose again after one ride.
Was thinking clamps but the flex pipe feels really hard and don't think clamps will compress it.
Thanks for any ideas
I tried exhaust tape on both sides. After 10 minute ride the tape on muff side burnt and came undone, the manifold side seems ok but after a longer ride will probably come off.
Also tried muffler putty when I first put eng back together and flex pipe was loose again after one ride.
Was thinking clamps but the flex pipe feels really hard and don't think clamps will compress it.
Thanks for any ideas