This 3 HP B&S motor and clutch weren't installed when I got it, so I really have no idea how this all works. Maybe it's the wrong setup. Info on these is just about zero. I'm seriously considering replacing the gas motor with an electric just for fun. I hope there isn't a limit on how many questions I can ask in one post.
1. Do I have the right engine/clutch?
2. Does the clutch belt drive the large pulley? The large pulley doesn't seem to attach to the shaft with a keyway or setscrew. What holds it in place? And what's that coil/springy looking thing in the pulley?
3. If so, the clutch and pulley don't line up.
4. What is the smaller pulley on the trans for?
5. There is what appears to be a bracket on the trans for a shift cable?
That's all for now. Thanks in advance.
1. Do I have the right engine/clutch?
2. Does the clutch belt drive the large pulley? The large pulley doesn't seem to attach to the shaft with a keyway or setscrew. What holds it in place? And what's that coil/springy looking thing in the pulley?
3. If so, the clutch and pulley don't line up.
4. What is the smaller pulley on the trans for?
5. There is what appears to be a bracket on the trans for a shift cable?
That's all for now. Thanks in advance.
Attachments
-
285 KB Views: 31
-
269.9 KB Views: 29