HS40 Block/Parts WANTED

ATKRIDER

ATKRIDER

New Member
#1
#1
Looking for a Tecumseh HS40 Block for a project build. I would prefer a block that has a junk bore just because it will be bored anyway so why waste a good useable block. The candidate will recieve a .080 over Wiesco piston/billet rod/big lite valves/straight shot slanted intake and a Gem hi compression head. PM me with what you have. I already have a bunch invested in this and really don't want to spend much more on a block but let me know what you have and we will go from there.
 
Ruppster81

Ruppster81

Member
#2
#2
Are you looking for a BARE block or a shortblock? I have an Hs40 with a scuffed cylinder wall, But its just the bare block with piston and rod. No cam crank or side cover. I might have a side cover for it?
 
Ruppster81

Ruppster81

Member
#3
#3
Also just wanted to point out if your using an .80 over piston you might want to consider finding an HS50 crank to help balance the rotating assembly. A stock Hs40 crank could viberate so bad it may eventually break or cause premature wear. Just something to think about...:thumbsup:
 
You must log in or register to reply here.
Top