Lil Indian frame and forks wanted

[markus]

Looking for a 69-72 (taller version) Lil indian frame and fork to build one more before I throw in the towel for good, I have pretty much everything else needed to build the bike I want. Needs to be pretty clean overall, not looking for bubble gum rewelds or rotted out tubing or I would have bought the last few frames that were on ebay :laugh: Buy or possible trade, can budget up to about $300 for the right frame (needs to be really clean for that). I will buy more if you don't want to break a roller up and just part it down to what I need as well dependent on price.

Will need it shipped to 34223 FL Thanks

 

[6doggie3]

Are you looking for the frame that came with a Tec motor?

 

[markus]

Are you looking for the frame that came with a Tec motor?

Yes, with the jig alignment hole sort of centered in the engine plate. All the parts I have are for the tec version bike (4" mags, late brake, pressed changuard, etc...)

 

[1971_MB1A]

Can you pm me a few pic's of what all models etc you are mainly interested in ? I may have something.

 

[george3]

Is this the model you are looking for?

 

[markus]

yes George that is the version, 1971_mb1a like the frame posted above


This pic has a good shot of how the brake tabs should look, and can also see the large hole that's in the engine plate which is a good "tell" for these:

 

[Mark G]

I "may" have a frame, swap you straight up for the lighted Lil Indian sign?

 

[markus]

Pass, if the sign goes it's pointless for me to have a lil Indian. It would take quite a bit more than a frame for that to come down off my wall anyway .

Thanks though.

 

[Mark G]

No problem, I figured since you were throwing in the towel you wouldn't need the sign anymore:laugh:

 

[Mark G]

Pass, if the sign goes it's pointless for me to have a lil Indian. It would take quite a bit more than a frame for that to come down off my wall anyway .

Thanks though.

Did I mention it's a two speed frame, and I have the forks also?

 

[markus]

Did I mention it's a two speed frame, and I have the forks also?

I need the standard frame like my last one. I dont have any 2 speed parts

 

[markus]

bump! Frame/forks style shown below is the version I need..............

This pic has a good shot of how the brake tabs should look, and can also see the large hole that's in the engine plate which is a good "tell" for these: