Was looking for some boat stuff in the shop when I came across my Peerless axle set up that I bought with Peekster at Windber a few years ago--so you know how that goes--the brain starts and before you know it I had it all cleaned up and mocked up on my lengthened Little Indian. I located a set of small slicks that I had and I think this may work.Got the hubs--will make plate to fit slicks or regular wheels. Have to get the Peerless keyed so I can move the motor over and use a go kart sprocket so I can change ratios. Will tear it apart and start on welding up the rear bearing holders.Updates soon.