McCulloch Kart/mini-bike engines Mc-49

[joelwey]

This first one is a Mc 250 Super saw engine(porting same as the Mc 49) with a Reed 458 manifold and homelite reeds,HL209A carb,Mc clutch(12tooth).The crank is a Mc 250 saw crank,ground to 9/16" by my machine shop crank grinder so the clutch housing can be used inboard.Everything works fine(and also a G.E.M. chain guard is included. $250 plus shipping.Ask any questions.
Joel(jjwey@msn.com)

 

[joelwey]

Here are 2 more pix of the Super 250 Mc Engine.

 

[joelwey]

Here are pix of the 2nd engine.This one is a Mc 49C with a minibike mount.New crankshaft,thin rings on a std bore,new bearings and seals,the carb (NOS) needs a rebuild kit installed,but it has not run since the rebuild.Neither of the engines are junk,they have been freshened up and run(except this one with the new carb)E-mail any questions you may have. $250 for this one plus shipping.
jjwey@msn.com
Joel

 

[joelwey]

And here are the 2nd group of pix for the Mc 49C engine.(carb is an HL282B 828)

 

[bill1]

Wow nice engines- bill1

 

[joelwey]

Mc Engines

OK,how about free shipping to the lower 48 states?
jw

 

[mini99]

what kind of power do these motors make?

 

[joelwey]

Engines,Mc

About 5 hp on gasoline........rpm around 9,000..........they weigh about 8 lbs.

 

[Oldschool]

My Dad ran these way back in his day...

I ran a bigger MC101 for a while and I had a Clinton ( not utility but a modified saw motor ).

In my non professional opion these saw motors are bitchen.

 

[Peekster]

Are these still for sale?