My wife tried a little mini bike racing and wants a race bike of her own for next season. I have been assigned to build it for her with two priorities, make it handle and make it pretty. You're getting in on the ground floor with this build and I'm open to input. The plan is to make it fit and put some taller rims and tires on it. I ordered a set of forks for it but they were crap with no dampening just a spring without a top cap to enable removing the spring. So I ordered forks from GPS and can tune those. The wheels seem to be lost in the mail and as such, I am working on modifying the frame. thus far I have removed the pegs and crossbar and then put a crossbar between the down tubes to allow the engine to move forward as much as possible. Once the engine is in and set up we can figure out peg placement.