Hey all I’m new here and have been scouring the internet for some knowledge on the new carb I bought and why I’m having such huge issues getting it to run. I have a Coleman with the stock 196. Has gov delete, aftermarket valve retainers and clips, decent pipe with muffler on it as well but no actual upgrades. Carb I’m using is a pwk 24 clone. Out of the box I didn’t realize the cable was too short and basically couldn’t get it to idle down or lean out etc. realized that was the issue and almost got it idling nice but had no top end. Messed with it more and now I can’t get it to run at all. Only comes with a few jets. 32 34 and 36 pilot 105 110 and 110 mains. Got it to idle at one point with clip at highest point on the needle but had no wot. I’ve watched countless carb tuning explanations and I get close but no cigar. Hoping someone can help me with a good starting point.