Tecumseh H50

midwestkustomz

midwestkustomz

New Member
#1
#1
Tecumseh H50-65403T S#1259D

It has been sitting for about a year, good compression, but could use a rebuild for best performance,no muffler, carb needs rebuilt,the lower shroud cover is rusted.

Looking to get $65 + shipping ($25-30 depending on location)

all photos: Z 4 Sale pictures by customizer007 - Photobucket








Also have this Briggs updraft carb. Its been sitting for while, will need rebuild & cleaned, some over spray on it. [edit] carb will fit Briggs 5hp, 3hp, 3.5 Flathead

$30 shipped (USA) paypal

a short vid: http://s2.photobucket.com/albums/y28/customizer007/Z%20%20%20%20%20%20%20%20%20%204%20Sale/?action=view&current=SDC11657.mp4




 
Last edited:
george3

george3

Active Member
#10
#10
midwestkustomz said:
Tecumseh H50-65403T S#1259D

It has been sitting for about a year, good compression, but could use a rebuild for best performance,no muffler, carb needs rebuilt,the lower shroud cover is rusted.

Looking to get $65 + shipping ($25-30 depending on location)

all photos: Z 4 Sale pictures by customizer007 - Photobucket








Also have this Briggs updraft carb. Its been sitting for while, will need rebuild & cleaned, some over spray on it. [edit] carb will fit Briggs 5hp, 3hp, 3.5 Flathead

$30 shipped (USA) paypal

a short vid: Z 4 Sale :: SDC11657.mp4 video by customizer007 - Photobucket




Click to expand...
where is the pic of the other side of the engine? Where is the tank and the filter assembly?
 
midwestkustomz

midwestkustomz

New Member
#13
#13
so, just was wondering... is the price on the Tech not in the range ??
or not what someone is looking for ???

I think i price my stuff fair... if it is not... just lmk :thumbsup:
 
Mark G

Mark G

#14
#14
I think it's priced right, hell it has a ball bearing crank, 3/4 shaft tapped and keyed- GREAT deal. People around here are just cheap, always looking for a bargain.....
 
george3

george3

Active Member
#16
#16
Tecumseh H50-65403T S#1259D

It has been sitting for about a year, good compression, but could use a rebuild for best performance,no muffler, carb needs rebuilt,the lower shroud cover is rusted.

Looking to get $65 + shipping ($25-30 depending on location)

all photos: Z 4 Sale pictures by customizer007 - Photobucket

dont need an engine that I might have to rebuild. pto bearing only.
 
midwestkustomz

midwestkustomz

New Member
#17
#17
george3 said:
Tecumseh H50-65403T S#1259D

It has been sitting for about a year, good compression, but could use a rebuild for best performance,no muffler, carb needs rebuilt,the lower shroud cover is rusted.

Looking to get $65 + shipping ($25-30 depending on location)

all photos: Z 4 Sale pictures by customizer007 - Photobucket

dont need an engine that I might have to rebuild. pto bearing only.
Click to expand...
George3, thats cool & thanks for lmk.

Like i stated, "it has good compression & carb needs to be rebuilt".

I could not "edit" my first thread, so, carb should be rebuilt or replaced.

compression is good for a rider, but if someone installed new rings, & clean 'er up, she would be a great runner.

It has been stored INSIDE- my dry basement on a shelf. I just dont have time for the TECH, too many projects. :thumbsup:
 
You must log in or register to reply here.
Top