Throttle linkage pictures

[Paul Erickson]

Is there a readable picture of how springs and linkage connnect on a Baja 165 carb? Not working right

 

[SAS289]

It looks like you are not using the correct throttle spring. And the spring from the governor arm to the carb is difficult to see but it normally has the throttle rod ran through it.

In the picture the black throttle spring gets connected in a position underneath the throttle screw at the far left in the picture. And you could see the very light tension spring with the throttle rod through it.

 

[Paul Erickson]

It looks like you are not using the correct throttle spring. And the spring from the governor arm to the carb is difficult to see but it normally has the throttle rod ran through it.

In the picture the black throttle spring gets connected in a position underneath the throttle screw at the far left in the picture. And you could see the very light tension spring with the throttle rod through it.

View attachment 296039

Thanks Good observations. I’m not sure how things connect under the the carb though. Hard to get a good picture of it

 

[SAS289]

Here are a couple more pics. In one of them you could see where the black throttle spring hooks up under the throttle screw I mentioned.

DJ-1231 Carburetor Throttle Rod and Return Spring - ARC Racing

 

[Strigoi]

The post of mine below has some pics of the stock throttle linkage on a Ducar 212. The only difference should be the location of the hole on the governor arm.

https://oldminibikes.com/forum/inde...-throttle-assembly-setup.173166/#post-1268015