Hey guys, I was just wondering if any of you with the original super bronc wheels change the bearings. I was sanding down the wheels to paint and I noticed that on of the bearings didn't have the cover on it, and I could see the bearings inside. I believe that the wheels are the original ones that came with the bike, so we are looking at 30+ year old bearings. Not to mention that the bike was caked with mud and salt (I live in Utah and the previous owner may of taken the bike mudding around the salt flats).
So a little direction on the size and kind that will fit these old hubs will be greatly appreciated. Also some advice on how to remove these old bearings.
Thank you. There will be pictures soon, I promise.:smile:
So a little direction on the size and kind that will fit these old hubs will be greatly appreciated. Also some advice on how to remove these old bearings.
Thank you. There will be pictures soon, I promise.:smile:
