10hp

  1. FirePowerMinis

    10hp HM100 of any use to recreational machines?

    I recall the Star jobs, but does any one run the "regular" ones? I have one on my snowblower, one on a gen-set, plus 2 spares. I think I'll put the Star rod in the 'blower even after price went up on ebay, trim the head and clean up the ports, build a long-tube header. Gennie is getting a...
  2. Jamie1972

    N.O.S Tecumseh 10hp. Engine

    N.O.S Tecumseh 10hp. Output shaft has been drilled/tapped O.D turned down to 3/4" to 2-3/4" long and keyway slotted. Fixed rpm spring and screw removed for variable throttle. Ready for your clutch and throttle linkage.! 185.00 Plus shipping.
  3. J

    tecumseh 10hp flywheel advance

    I have a Tecumseh 10hp engine. My question is "Is there any advantage to advancing the flywheel timing on this engine"? It is a late model engine with the mag above the flywheel.
  4. N

    Super Bronc 10Hp Tecumseh Intake ?

    I have seen examples of Super Bronc V10 with both the long intake and with the carb mounted almost directly. My super bronc has been hacked and painted so many times I don't know what way it should be. It is running now but has no filter assemble so I am tracking down that. Does it need the...
  5. N

    Tecumseh Air Filter & Cover 8 - 10hp

    Need a mount, cover and air filter for a 8-10 Tecumseh engine on my super bronc. Right now there is just a long bolt threaded bolt that is bent and nothing else. Thanks !Attached is what I am looking for but not picky about color.
  6. Jamie1972

    @@$99.00 NOS 10hp Tecumseh engines@@

    For all you guy's.....(and gal's) who want a Monster engine for your big tire bikes....or little tire... I found this guy Jay, who is selling Brand new 10hp Tecumseh engines for 99.00..... These ARE tapered shafts and fixed carbs..... BUT!!...... For a additional 40.00 he has a machine shop cut...
  7. F

    Heathkit Hilltopper, drag frame project, 10hp tecumseh, and all parts.

    I have a Heathkit hill topper minibike. I put a big block 6hp Tecumseh motor in it and a new torque converter clutch. Also a new seat. Real fun minibike with plenty of power. good for a big kid or an adult. I also have a ton of minibike parts. I started building a drag minibike frame. I have...
  8. S

    Frame for a 10hp tecumseh

    I've been thinking about another minibike project, using an 80s vintage 10 horse Tecumseh. The engine is pretty large and I'd like to avoid stretching a chassis. It's definitely too big for my Grand Prix Are there any families of minibike out there that I should be shopping for?
  9. jeep4me

    Couparral 2-stroke...10hp

    Selling this motor I recently picked up. Couparral 2-stroke. 10hp, tillitson carb. Missing the recoil. Was originally on a vintage snowmobile. I haven't tried starting it, turns over freely and feels like it has good compression. Asking $160, plus shipping. PayPal preferred.
  10. G

    Tecumseh or Preditor?

    Me again everyone,Just try to see which way I`m going to go with my warrior..should i get a Tecumseh or preditor? Which ever motor i get will be out of the box for sure..will be either an 8 or 10hp..I`m guessing..
  11. J

    Homemade Minibike

    Hi: My name is jescot and live in Fresno, CA. I am 59 yrs old and currently have a 69 or 70 powell challenger I just finished fixing up. I am also in the middle of building a homemade mini bike using 1" square tubing for the frame. It has 22x11x8 size tires so it is big. It will run a 10hp...
  12. Outlaw Ace

    Dellorto UBF 22B carb and Hapco 1" pipe thread muffler

    Dellorto UBF 22B carb and Hapco (Hap Jones) 1" pipe thread muffler off a 10hp briggs that was on my Bearkat Twister with a 6hp shroud. I thought the engine was a 6hp but it was not, turns out it was a 10hp. The carb bolts right onto a 6-10hp briggs and all Tecumseh flanges, the muffler is 1"...
  13. 1

    10hp Tecumseh carb relocation

    Hi, I have a 10hp tecumseh I took off a generator to use on my big-wheel bike I'm building. I'd like to move the carb, as it's mounted on the end of a down-swept manifold(?). I'd like it to be higher, due to puddles, etc. Can I just eliminate the intake? I've seen other motors with the carb...
  14. diggers

    WANTED WTB: Tecumseh 10hp air cleaner assembly in WHITE!!!

    I'm in need of an air cleaner assembly for my old Tecumseh 10hp. I'm needing it in the vintage Tecumseh white since the motor is all white looking for a NOS or a very nice one. Or if you just have the outer cover that would work also. Just let me know what you have I'd appreciate it. THANKS!!!!!!
  15. diggers

    Need help with a carb for a 10hp tecumseh

    I have a 10hp Tecumseh on my super bronc and its missing the intake, carb, linkage arm from butterfly to governor, and air cleaner assembly does anybody have a picture of what its suppose to look like??? Also if you have the complete setup and don't need it I may be interested in it. The model...
  16. matt2

    I think a 8 or 10hp early 60s

    Hi everybody I was given a H/F 18 volt cordless impact the 1/4" hex drive, from my son he loves his dad. I thought I would give it a try on the original engine from the Mighty Burro. I think the engine is a 8 or 10hp Briggs&Stratton from the early 60s. In the early 60s are the numbers still on...
  17. CarPlayLB

    Tecumseh Star 10HP Monster-complete

    Hello Fellow OldMiniBikes'ers. I have a brand new Tecumseh H50 (maybe a Star? You tell me!) factory race motor. These came from the factory needing to be put together. Crank and piston are in the block, but not connected. Here is all that you will get. Brand new Tecumseh Star, Clements billet rod, new...
  18. Stangrcr1

    Tecumseh 6, 7, 8, 10hp engine

    Like the title says. Any of the above in good or at least minimal rebuild condition. Pm me if ya have something I could use.
  19. philbo

    Anyone put a Tecumseh 10hp engine in a Baja Warrior?

    Hi guys, just wondering if any one has put a Tecumseh 10hp Snow King engine in their Baja Warrior/Heat/Mini Baja. Was wondering if it would fit without modifications. Any one see this before? The 6.5hp clone engine has the piston at an angle making it a shorter engine. This one appears to...
  20. teltech2020

    Tecumseh 10hp backfires

    I just finished rigging up a throttle mechanism for my new Tecumseh LH358XA-34 (HM100) engine. I'm pretty sure this engine was designed to go in a generator or something else that is meant to run wide open all the time because it didn't come with a throttle lever or anyway to connect a remote...
Top