3.5

Hello all, got this minibike last year for my daughter and she rode it all summer no problems. Started right up every time. Put it away for winter with a tiny bit of gas left in bottom of tank. Less than a 1/2 inch. Yesterday I decided to bring out the bike so she can ride it and decided...

Sorry thread was made in wrong forum....moderator please delete sorry

Anyone done a Briggs flathead on a DB30 that has some advice about mounting and chain alignment?

text me for more photos 4193719545 or email resolutionrebel7684@gmail.com I think it was off a rupp originally had a slant intake. Also have the head that's not pictured 65 plus shipping.

Looking for some Broncco wheels...preferably in 'decent' condition. 3.5 x 7 inch and 3 x 5 inch. Thanks.

A friend of mine gave me this beauty, says it's been in his daughters garage for several years. Can't wait to get it on to road. My second Thunderbird

Not having any luck. # on cover 143 744012 SER 4031B Any help would greatly appreciated:helpsmilie:

Hey Y'all... I was out riding our little Alsport Mts-30 trike yesterday evening and had been riding probably 15 minutes on the road....not going very fast...and not really putting a strain on the engine....so I'm going down a small incline, and the trike starts coasting at a speed faster than...

Minibike with a type of front suspension. Has a zerk fitting on each fork. Has dual rear sprockets. One on each side. Also has a rear cable operated brake. Engine is a Lauson Tecumseh 3.5hp. Wheels are 7".

Minibike with a type of front suspension. Has a zerk fitting on each fork. Has dual rear sprockets. One on each side. Also has a rear cable operated brake. Engine is a Lauson Tecumseh 3.5hp. Wheels are 7".

Minibike with a type of front suspension. Has a zerk fitting on each fork. Has dual rear sprockets. One on each side. Also has a rear cable operated brake. Engine is a Lauson Tecumseh 3.5hp. Wheels are 7".

Minibike with a type of front suspension. Has a zerk fitting on each fork. Has dual rear sprockets. One on each side. Also has a rear cable operated brake. Engine is a Lauson Tecumseh 3.5hp. Wheels are 7".

Minibike with a type of front suspension. Has a zerk fitting on each fork. Has dual rear sprockets. One on each side. Also has a rear cable operated brake. Engine is a Lauson Tecumseh 3.5hp. Wheels are 7".

Minibike with a type of front suspension. Has a zerk fitting on each fork. Has dual rear sprockets. One on each side. Also has a rear cable operated brake. Engine is a Lauson Tecumseh 3.5hp. Wheels are 7".

Hey all. I had a 3.5 brigs model 91212 on my manco and swapped it out for the predator a while back. I no longer have the gas tank for the brigs. I was wondering if someone had a source for brigs parts or had one laying around they would sell me. I have seen one or two new online for like $60...

I just bought a Murray Track 2 with a Tecumseh 3.5 hp. I think the clutch is going out on it because it will barely climb small inclines. Instead of buying another I was considering one of the cheap Tav2 knockoff converters off ebay. But am curious if its a direct fit on the engine and is...

like new Briggs & Stratton 3.5 hp motor (Flathead). only 3hrs of use. $125.00 + 25 shipping we put a predator in, took out super nice Briggs 3.5hp motor.

Picked up a 3.5 hp briggs today and was wondering if this is a ok motor for a mini bike? 3/4" dia. shaft x 2 1/4 long. New to the hobby, needed to ask people who know. Thanks. Engine ID.. MODEL 91202 TYPE 1016 E1 CODE 9806 10FA Oh I forgot to say it...

It's says h35 -45180f Serial 894 03794

Does anyone know where the spark plug wire routs on a Tecumseh 3.5 lighted engine probly around a 1967-68 engine if that matters.