advance

First time posting on this forum. I am a volunteer for a 501c3 non-profit. A group of folks are working on a Ken Bar Whirlwind with an original H40 engine. The aluminum cylinder walls are scored beyond repair from possible cracked ring(s). The crankcase/valve guide breather is expelling...

I have a Tecumseh 10hp engine. My question is "Is there any advantage to advancing the flywheel timing on this engine"? It is a late model engine with the mag above the flywheel.

Well hi. I'm new. Any way lets get to it. Everyone knows how Briggs blows air out the carb right? Advance the cam a tooth. Way more compression. I will run it tomorrow and post results. I'll try to get a picture of my mower to tired though. I hope this is a new idea.

Hello, I'm in Indiana and Sorry I'm new to this but wanted some info and found this site, This was picked up from my Father in law and I have no idea or clue to what it is, I am in my (well lets just say old) and couldn't ride this so I am going to sell it but wanted as much info on it as I can...

selling my bike because my van needs fixed for windber, Its all new, fox lemans racing wheels, new seat, band brake. New 79cc predator engine. Can deliver to windber if paid for in advance. Let me know send a message looking for 500 cash and located in Cleveland ohio. also the tires have...

Title sais it all, I know nobody uses 80cc since they're slow and cheap but im trying to find the best place to purchase parts or anything custom I can add to the MM-B80r! Thanks in advance..I been told before to upgrade the engine but I just bought this bike so Imma see how it goes first

Just curious how to make a bigger avatar ? Many of the veterans here , have some nice ones. Thanks in advance.

Curious if there are any performance parts that I can buy for this engine? Thanks in advance. Brand new.

Hello peeps, I am still looking for another set of NOS 5.30/4.50 6" General (brand) traction tires. I picked up this TT500 and I would like to throw a set of those on there. Let me know if you have a set and what you are looking to get for them. Thanks in advance!

I am about to start this new build and I have a mikuni 24mm for it but I don't have an intake for it. If you have one that is pretty cheap, reply or inbox me and let me know prices. I also need a 3 stage header as well as a std length billet rod. If you have a used billet flywheel for a flathead...

Hi, Anyone by chance have a PDF repair manual for a sears/tecumseh 143.754042 H35-45592R Thinking of rebuilding but also need torque settings. Thanks in advance.

Wondering what these wheels are off of ? Or what kind they are ? Thanks in advance. The front one is in bad shape. Thanks again.

Hello All, I'm in need of Torque Converter Cover Decal Measurements ? If someone could help that would be great. Thanks in advance, Cory

Thanks in advance

I have a T&D Klipper Kart, and it has a 1" live rear axle with a 3/16" keyway, and I cannot find a matching 10" wheel for the life of me. Does anyone have any suggestions >25 USD? Thanks in advance, Wyatt

Anyone know what model this? Thanks in advance...

Like it says up there. Had to take the one off my bike for the one I built for a kid. Now weathers starting to change and I need one for mine. Thanks in advance.

It came with the motor, but I would like to know what the frame is ? Thanks in advance.

Can't figure this one out. It was on craigslist. Disc brake has brass pads...? Thanks in advance for you help.

Like the title says, I need the rear wheel for a wildcat. Thanks in advance