finding

hi,im new to the forum,located in western ny state. yesterday i got a project from a guy off this forum. it appears to be an old heathkit frame. my intentions are to modify extensively the frame,forks,braking system,and motor. the rear wheel is completely wasted,and the axle...

I have found item #1 to put on my bucket list..... worlds_best » Page 1 of 7

Week two of a search now. Can't seem to find anyone interested in welding and seat work. Today I got a name of a fellow that did work for me 20 years ago. He's still around and doing his own thing. So I am going to try on one more kick at the can. (Life aint been the same since my last...

I'm trying to find a bonanza cr500 roller. I fall in love with the bike saw one on CL but it was sold. Does anyone know were I may be able to find one. Keep in mind I'm in Nor Cal.

I am in need of the little spring that many minibikes use for front suspension. I'm talking about a spring that goes on the bottom of the bolt that attaches the forks to the frame. It doesn't have to be original to any bike, just a spring(and cups) that will work. I like the short ones like on...

Hey I'm looking for a tire assemblies to attach to this part Thank you

So I'm in need of a slanted plug head for a 5hp briggs and an angled intake that I can mount a mikuni carb on. It's going in this same frame but of course mine is missing the 2 stroke tec.

Hello everyone. I'm new here. I have recently acquired a few small bikes and am trying to find some cool vintage looking tires for my 1974 XL70. I found a video of a bike that looks like mine on youtube but i cant figure out what kind of tires the guy has. If anyone could help me out i would...

Hi All I wanted to see if someone could help me find a part or tell me what size and thread it might be. It fits, Puma 200, MB165, or Baja Heat Mini Bike with the 6.5 engine. Anyway I lost the large nut on the top of the fork tree (center one) Baja Motorsport has it listed in the part...

I have a gx 200 clone with header intake jets 18pound springs 14cc head I have been running a comet but have been having issues with it I think it's just about shot so I'm trying to find a replacement a little more info on how I ride what gearing and tire size. I have 13x5-6 tires and 68t...

I have an H50 im trying to rebuild and find parts for. I found this throttle linkage thread http://www.oldminibikes.com/forum/tecumseh-engines/23646-advice-hooking-up-your-h40-h70-tecumseh-big-block-throttle.html. But cant find the parts any where. Does any one know where i can get it or do they...

So I'm trying to set the valve lash on my 6.5 Honda clone. How do I determin TDC on the compression stroke? I used a flash light and watched the piston till it was at the top. But I'm not sure weather it's the compression stoke or not.

My Huskee trail rider has a 3 hole pattern rear :out:sprocket with 1-5/8" arbor? Everything I find on-line has a 4 hole pattern with a larger 2" + arbor. Am I missing something here? Any help that any of you can provide is much appreciated. I suppose I could machine a bushing for the...

I'm trying to find out what the bolt is called that holds on the rear outter sprocket for the jackshaft. The threads on it got stripped, the nut fell off, and the key fell out. So I need a new bolt, nut, and key. If anyone could link me directly to a site that sells exactly those parts, it...

im looking for a #40 72t sprocket with a 2 1/2" bolt pattern. im hoping the #40 will work with a #420 chain.

I have chopped up the DB30 and adapted a rear swing arm with rear shocks. I need help sourcing out a proper shock. With the two shocks in place it is too rigid and the spring rate is too high. I didn't realize that the shocks are rated at 520lbs a piece, with one shock in place it is perfect...

So my doodle has been out of commission for far too long. During the day its been too hot and at night too many mosquitos for me to work in the garage. Now the weathers nice and its time to get riding. my motor started making a loud rattle after my brother took it offroading. I realized my...

I have a Warrior with a TC that I have changed the jackshaft sprocket from a 10T to a 12T and am getting 40 to 43 MPH. Wondering if a 40T (comes with 50T) on the rear would not give me the higher MPH that I'm looking for:scooter:. Used mostly on the road so low end pull not critical. Anyone...

Hello i need some help in finding a vin or identification # on my Alsport Tri-sport RTS? Don't know for sure if It's a Mac or an 8? I know a few things for sure , but I don't recall seeing a vin # stamped in the frame or a sticker before I sand blasted it.... its gota be pre 74' do to the body...

Anyone have any luck treasure hunting at a dump or landfill ?