high

This guy might win.

Just wondering if their were any good opinions if one wanted to go fast and go fast quickly with out giving any further details. EDIT: just to clarify..i am ONLY asking about the camshaft. i was going to get the Black Mamba but everywhere is out of stock so i bought the .275 cam.

try riding in one instead :laugh: GO KART-GIANT HIGH HEEL SHOE ON GO KART CHASSIS

Is it just me or does it appear that they didn't have a long enough axle for the rear. So, they just bent the frame to make it narrower. :scared: Mini Bike

My 212 Pred is just to much engine for the ARCO. WAY too easy to wheelie and the kids are happy going 20 mph.:shrug: The 79CC engine moves me along but I think the 11 tooth drive gear and 60 tooth driven gear might be too high for this bike with 6" tires.:confused: Once you get this thing out...

My sprockets are aligned properly. I checked the wheel sprocket for bowing. I've tensioned the chain as much as I can comfortably. When I throttle up, the chain starts to get slack on the underside of the sprockets. I would expect this from flex in the jackshaft. Any time I really dig into the...

I am listing this for a friend. He has a very fast 244cc engine for sale. He is asking $1400 shipped OBO. this is a badass motor... if i didnt have three small block builds going (i would buy it, would have saved some money). and i will be as specific as I can, with any questions about it...

Newbie here, I'll bet you guys know the trick to straighten my high speed forks on this Fox Trailbug I just picked up yesterday.. Thanks in advance !

Not Bad Loooking hound dog mini bike

Hey guys.....I know my old 1976 B&S 5hp will run now. I just can't get it to stay running any longer than a couple of seconds. Tank is clean and full and the diaphragm has been replaced. All passages in carb look clean. pour gas in carb or use a little ether, and she starts on 1st or 2nd pull...

who makes high performance parts a tecumseh hs50?

it has G and S on the back of the sissy bar

hoping to run between 55 to 60 mph and who makes highspeed bearings that will not come apart? Thanks

Hi guys, I have a briggs intek 206 with .060" shaved off and it is pretty hard to pull start. The cam does have the compression relief mechanism but I have not figured out the sweet spot when starting. Is there something that I'm missing? Or is it normal for it to be very hard (lift bike off...

On CL in Florida

This exhaust pipe has a drilled out muffler and is smoothed on the inside of the bolt on end,its been bead blasted and painted with VHT high temperature paint.it is quieter than an open header but is still high flow. $25 plus shipping.

I have a Honda Gx200 carb .670 max bore with 140 emulsion tube , .020 pilot jet & 98 main jet. How do I lean it out at high Rpm? Change the emulsion tube? I don't want to change it from the snap of the throttle.

Stock predator 212 with throttle adjuster screw backed all the way out. I top out at 36 mph but there is a ticking/knocking at very high rpm. Can someone tell me what this is? Also, this does mean I have disabled my governor?

Hello friends, this is my first post here. I'm looking for friendly suggestions :thumbsup:. My friend and I have occasionally messed around with his Mini Baja Warrior bike by trying to increase its top speed. We arent looking to race or anything, but we started getting bored with offroad...

Soooo....how high is high tension? I'm wanting to order a stronger spring but not 100% sure which one. As for now the mods consist of gov removal, pipe, jet kit, and cone filter with adapter. Future mods will be a billet flywheels and billet connecting rod. I don't want to buy...