max

Provided your engine can dish out the RPMS, what is the 'max' rpms any of you all have been able to pull on your torque converters? Failures? Safeguards? I'm not talking about the guy that forgets to put lock-tite on his drive unit crank bolt and throws it at 3600 rpms. Lets hear what you all...

I'm about to go pick up my first mini which I'm getting in trade for an old Honda pit bike engine. It's a lime green Baja Racer with a 3hp engine in it. I'm going to toss a Predator 212 in there at some point as I doubt very much the stock engine will move me with any speed whatsoever. I'm...

for sale max-torque clutch spring, used for less than 20 minutes. one step above stock, 2200rpm. shipped usps from balt. Md. $10 cash, check, m.o. paypal accepted, buyer pays fees pick it up at windber $7

Can some one please explain the theory behind the different RPM ranges for the Max Torque Clutch springs? Mainly how the different RPM Ranges work on the springs.

I have a Tecumseh H50 Motorsports engine with a 3/4" shaft that in stock configuration should make about 9hp and 7000 RPM. I may tweak a HP up a bit in the future. Question is are there any TAV setups that would work at that RPM and handle the HP? I found this...

Brand new, never used, 12t. $65 shipped.

Looking for clutch shoes. NOS would be great, or nice used.

I know for a fact it can handle 140psi compression but I am curious just how far can it go without launching the head like a rocket. I replaced the stock head bolts with steel ones from Tractor Supply for extra support.

draggin skin clutch 3 sets of brand new springs , new spring holders , new shoes , two drums and 10 sprokets original paper work too everything included $110 shipped

Just wondering if 42mph is the absolute fastest i can go with a TAV-30 and if i can do anything to help it gain more RPMs but i must first say i have the Yellow driven spring and i drilled a 4th hole and it helps a big noticeable amount on acceleration but i can still only go 42mph. Any...

Working on a Fox Trail Tramp/Trail FX. I found this clutch: https://www.OldMiniBikes.com/Max-Torque-Dual-Sprocket-3-4-Clutch-for-Two-Speed-MiniBikes.html I am thinking about trying to get it to work on my set up. Fox Spoke wheel bike as mentioned with a Tecumseh HS40 motor. anyone...

Curious. What's the max RPM for a Tecumseh H50 - no governor. Thanks! joel

Does anyone know how much more power you could get from the arc upgraded air filter adapter vs the regular one?

Hi Guys, I disassembled the clutch that came on the mini I bought a while back and there is a groove 3/16 wide were the shoes engage the drum seems like the shoes should be in contact the full width of the shoe right? Not just the edge of the shoes, has anybody seen this is it normal or junk to...

Hardly used 5/8 35 pitch max torque clutch $23 shipped

60 plus shipping. Would like to get rid of them asap as I'm nearing the end of a build and also the Budget haha. Message me For pics. Clutches are all functional just a bit of wear

I am not sure what this all about lol https://www.youtube.com/watch?v=7qCj2Z_mph0

12 tooth 35 mx torque 3/4 bore good functional cond. but some surface rust from sitting :thumbsup: $15 shipped

Used max torque 3/4 35pitch 12t. 15$ plus from 10509 obo Would consider 20$ shipped to some places. Text 914-494-1288 for pics if needed. PayPal because like to keep hobby monies separate!

To get the best performance. What r the best combination of after market parts for a predator 212 brand new engine, or is the stage four kit good enough?