I have a genuine maxtorque ss clutch. Yes, I know they are crappy and worthless and there are better clutches out there which I would buy if I could afford them. So now that we've gone over that, I hope it will eliminate all the useless replies telling me to junk it or flaming me for asking for...
I've had no luck selling it on craigslist and am selling it by pick up only. Still has great torque and engages perfectly. Comes with the set screws and key. $20 - I accept PayPal, Bitcoin, and cash obviously. If you're interested call or text me at 808 938 8238 and I'll tell you where I'm...
I have the maxtorque six-shoe clutch with the stock shoes. I installed the black spring, and now the shoes are too light for the spring. I'd like to try some heavier shoes ( I know what some of the opinions are going to be, but I've done some research and what I've read is that heavy shoes and a...
Went to take the engine off the go kart I picked up a few weeks back, and found this hiding under the clutch guard. Seriously, looks like it sat out in the elements longer than it was ever run. The teeth are almost perfect on the inner set where the chain was riding. The outer set of teeth...
I was shocked to find out that Hillard recommends cleaning there Inferno/Fury clutches with WD40.
http://www.hilliardextremeduty.com/media/blaze_blizzard_instructions.pdf
I was curious if anyone has applied this to a MaxTorque and what kind of result they observed? I have a fresh...
maxtorque clutch has a "8" on it??? what size is it? teeth i can count it has to be a 3/4 shaft.i guess the chain is so old it has no size number. the engine is a techumsa 6 hp dinosaur but it runs.
I picked up a doodlebug at the dump last week and ordered a clutch for it from Maxtorque. I ordered the 5/8", 11 tooth for #35 chain. It seemed to be a perfect match. I just got the clutch yesterday and tried to put it on. I lined the key up in the groove and started working the clutch on the...
I just got a Max Torque clutch (5/8") for the stock DB engine. The stock clutch slides nicely off the crankshaft, but the new clutch won't go on. Even with key removed from clutch, no go. Caliper shows shaft is 5/8" and clutch ID is 5/8".
I tried sanding the crankshaft down, but still no...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.