I have the urge to weld stuff lately so I pulled the mickey frame out to replace the rear axle mounts, fill some holes etc. that needed done.
For some reason they cut the rear mounts off and moved them back
Never paid attention till I was making the new plates that they are 1/2"...
While restoring a Mickey bike I needed a sprocket, and decided to share this not in its title or description OldMiniBikes does offer this sprocket in 60T and 72T with a 4 1/2 drum.
The Astro Mickey JDE and Aggie with JDE ( Jim Dugan ) wheel and Trail Horse all have the same bolt pattern
The...
So a while back I found an old Mickey Thompson Minibike. She was a roller in rough shape. It had the original frame, fork, wheels, and bars. As you can see the forks were buggered up with lots of steel and welds. Here are some pics as I got it....
Someone gave me the specs on this a long time ago and can't seem to find the e-mail or PM that was sent to me.
Mine is a badge style frame. Need to know long the tube is that is the footpegs.
I was watching these for a while now thinking maybe they'd fly under the radar & I'd get them cheep. Hopefully went to someone here.
Mickey Bike wheels?
I wrote an article about Mickey Rupp for National Kart News in 2008 that may be of interest to the folks on this forum. This should be a link to it. Give it a try.
https://dl.dropboxusercontent.com/u/24023714/Mickey%20Rupp%20by%20Quentin%20Haines.pdf
didn't want to cut into anyone elses threads so I'll start a new one. hoping to get some close up pics or guidance on a few things on the frame I just got.
1.Need a pic or info on what the kickstand looked like as the tab is there but stand is not, or something that works good as a...
Here is an original set of Mickey Thompson Wheels. These are 6" wheels with the tapered roller bearings. I am told other sealed bearings are also available as well. These were purchased from a vintage karter and had been sitting on the shelf since the 70's. He cleaned them and installed new...
Mickey, King o' Lawn, Aggie Wheel w/ 60t sprocket...includes the hard to find cast aluminum spacer. Not sure if the sprocket is original to the wheel or not..there's a real nice wheel hiding under all that patina...not a nick, chip or bit of curb rash anywhere..
Had a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.