pads

I got last weekend a complete sears roper mini bike. it needs new brake pads. can i find repops or even an upgraded caliper/rotor set up? And I need the tail pipe for the exhaust as well.

Okay so a couple days ago I installed a hydraulic brake kit. Today I finished my brake pads. Luckily it came with an extra pair. Now what I want to know is should I just buy replacements or heavy duty copper pads?

Like the title says need 4" brake pads for my rupp . It's a scrambler with 10" mag type wheels .

I am looking for a proper set of replacement pads for an early lil indian disc brake. The non louvered one. The ones I took out measure 1/4" and the other is about 3/16". All the ones I see for sale are much thicker. Anyone know the proper thickness??

Anyone know where I can get replacement Lil Indian disc brake pads ( early) ? All the ones I see for sale are way too thick. The ones I took out are 1/4" and 3/16". I realize this could be due to wear. What is the proper thickness?? Thanks for any help.

going to order brake pads for the slingshot but I have no clue what pads fit a stock cat. going to order from OldMiniBikes parts.

Trying to contact f150tilt who has the clutch parts I need BAD.Any HELP?

Just figured I would throw this out there. Use some of these rubber pads on the frame to protect from the steering triple tree chipping your paint when turning to the max. I'm sure there are other options but this is a cheap one. Get them at Lowes. Looks a bit better than tape me thinks.

I needed some new disk brake pads for my Lil Indian caliper, had to buy a minimum quantity of material so I made a few sets. Nice reproductions, includes the metal disk that goes behind the outboard side to take the pressure of the two pins. I have these on ebay for $15 a set +$2...

I have a motovox mbx 10 and its time to change the pads does any have an idea one witch one I should be lookg for and from were thanks

I have this bike and can't figure out what it is. It has been heavily modified, at least it was when I put the 150cc engine on it. I'll try to get better pictures today if I can. The problem is that I need new brake pads (especially with the big engine) but everyone tells me that I need to...

Hey guys, i searched the forum for 2 different things i need to know about the db30 brakes. First i would like to know what the size of the brake pads are, as i haven't found them anywhere here on the forums. The second is can i buy these brake pads in Canada anywhere? shipping from the U.S is...

hi i have 2 minibike brake scrub pads, should fit bird & others.. $40.00 each shipped..

Upgrading my brake shoes on my Warrior to the Honda XR style. The ones I picked up are EBC brand pads. Wanted to make everyone aware that while the pads are a direct fit you will need to use the Honda springs as well. New ones should come with the pads, if not you will have to spend a buck...

Digging around today preparing for a local Cycle Swapmeet and found these two Bird Engineering aluminum scrub brake pads again. $30.00 each Delivered: . . . . This is the design of the backside : Same pads used on the Sears Ropers.

im having trouble finding super bronc front drum brake pads or a front brake assembly. any ideas on were i can get those. its close to 4 1/4 inchs from pad to pad. thanks guys.

Using the search function on this forum I have already found some suppliers of pads- Thank you!:smile: My question: How difficult is it to replace the pads?:confused: Any words of wisdom, do's and don'ts, or other tricks of the trade from any of you that have replaced them? I am reasonably...

I am working on the brakes for my Retek Cheetah, and I want to buy new pads for the rear caliper. How do you attach the new ones. I want to make sure I can do this before I destroy the old ones prying them off. I am sure I wont be able to get the exact same ones , but I can get close and carve...

:rolleyes: Made in China,they fit most of the replaceable ones that pivot like on the early birds,Sears,etc. $15 shipped gets you both. regards,Joel

Whats up guys, Just checking the to do list for my new mini and figure I need to get some brake pads. The pad part is completly gone. can you buy these or glue something on them?? My wheel is 5 3/4" round and the tire size is 4.00-5.:confused: What are these brakes called? Drum Brakes?? Thanx...