parts?

Does anyone still sell the repro torque converter covers and stickers for the Super Bronc VT-8??? If so, where? Thanks, Doozer

I remember the go karters used to have a 10hp Tecumseh star class. Anyone still sell hop up parts for the 8 and 10 hp Tecumseh?

What kind of increase in power (if any) would I see by adding this to my stock Predator? Predator Go Kart Kit - Air Filter, Jets, Springs, & More! Not looking to make 80HP (LOL!) just want a good powerful, dependable motor for my drift trike project.

Looking for the rear frame "hoop" for a Conti Special. This the part under / behind the seat. Fixing a damaged frame.

I have been looking all over for an old 3 wheeler so I could steal the front end off of it for my BigCat and I found one. I stumbled across a 1980 atc200 that supposedly ran but was put up because the tank leaked, anyways its complete and I figured if anybody needed parts, I wouldnt feel so bad...

what up people i have a honda GX-340 and want to make 30 hp + from it and put it on my drag bike... i need to kno what do i have to do to get it there like what should i take off the head cam spec carb size springs rockers everything im already in the market for a aluminum flywheel...

I've been watching a Cat Slingshot that was parted out and put on ebay piece by piece. The selling prices are making me scratch my head. I don't get it. :shrug: $100 - kickstand $50+ - fork spring and cups $93+ - Handlebars/fork assembly (I think this sold on the lower side because the...

I'm missing a few brake parts off of a couple of my Cat bikes and I'm having a hard time finding them through a vendor/store. I'm hoping there a few guys here that can direct me in the right direction. I checked OldMiniBikes warehouse and I'm not seeing the parts listed. For the drum brake on a Cat...

Hopefully this will be the last thing i buy for my motor but, is anyone on this thread selling a crankcase cover kit with bearings, a rubber crankshaft seal with the round spring and a gasket? I need to know if anybody has one for sale.

How do you figure out what the engine really is? If you put in the info on the housing, nothing shows up other a general info on the type of engine. What is this engine so I can find parts? 80202-1782-84072503

So its winter enough to start work on my "winter" project. Last year Santa brought my son a Doodle Bug. Soon after a c6.5 clone was installed. Next we are going to install an exhaust, filter and fuel tank. My question is which ones? Below are the ones I've been looking at. Any issues...

Need a conn rod part number for a HS50 67054A 52208

I have several cad or galvaized plated parts on my 50 year old kart im fixing up and the parts are now clean but look bad compared to the painted chassis how can i get the cad plated parts looking new again?:shrug:

I need some parts for my scrambler, like fenders, driver + driven unit and a tank.. Any good places?

When I bought my mini bike frame it came with a crate of misc minibike, kart, automotive, and motorcycle parts. There is a couple of things I don't recognize and don't want to throw out unless there truly junk. I already made a bundle on ebay selling the vintage kart parts. 1. Do you know...

Working on the cub that I got from Bill1 and trying to decide on which wheels to use. I have 2 different sets of wheels to choose from, and we think both correct depending on what year the bike is (which is still nailed down 100%). I'm actually thinking "down the road" as far as the most...

I love working on old flatheads and typically work on one or two every week or two. I buy a lot of diaphragms and carb to tank gaskets, etc. Where would be the best place to find a large quantity of them for cheap other than ebay?? Im hoping to find them for under a dollar a piece or so. I...

We were able to pick up an old Sears Roper (roller) recently and will be in need of some parts (and LOTS of education!) for the upcoming rebuild/restoration. Who is the Sears Roper "GURU" on this forum? Can you point me in the right direction? My son, "The Ruppster 86" will be posting photos...

Hi all, new to the forum. Been readin' on here a while now. This place is awesome! All kinds of great info, tips, & tricks, love it! Anyways, i'm looking for some good used b&s 5hp flattie parts. Anybody got any or know where to purchase some? I hope i'm not posting in the wrong place, if...

I do!!!