I have two manco/bird/sears gas tanks.
One is all black and good shape. Looks to be wrong gas cap. Asking $25
The other needs to be painted and ok shape. Asking $18
Both have no holes or leaks.
Also I have a 40 series comet driven in good shape.
Asking $35
Price do not include shipping.
3 4" to 1" inch w Step Key Gas Engine Pulley Crank Shaft Sleeve Adapter Predator | eBay
Has anyone used one of these?
I want to run a 40 series on a 3/4" shaft. The question is the key. I know it has the key to go onto the 3/4 shaft and into the adaptor 1/4 slot. It is hard to tell from the...
I'm looking for both a Comet 20 Series driver with a 1" bore. It can be the black or silver. All I care is that is in good condition. I'm also looking for a Comet 20 Series driven with a 3/4" bore. The driven needs to be the 6" version. Again color doesn't matter as long as it's in good...
I pulled this Comet 40 series TAV setup off from a Heald Hauler.
It includes a forward/reverse gear box w/brake band and #40 sprocket. Also includes NOS 40 series drive belt (not the original one to the way this application was set up on the Hauler).
There's no bottom on the gear box. It...
i am looking for a 40 series driven to use on my manco 3 wheeler project. already have a driver i just need the driven.
i can get one new on ebay for like 80 but id like to get it cheaper, possibly trade for it. let me know if you have one!!!
Hi, new to the forum. I had ordered a car part a long time ago, the box came and I put it on the shelf for a long period. Unfortunately, the box was repackaged by postal services with a 'sorry note' stuffed inside. So my hub is long gone and I have this part. I have no idea what its worth, I...
I have a comet 20 series drive for torque converter. I would like to trade for a 30 series driven for future db30 build. 20 series is brand new. Used not even an hour. Still have box and directions.
I have a tav2 that was going to go on a different project, but that was 1" shaft. I just got a predator 212 hence the 3/4" need. I'd be willing to trade the 1" or buy the 3/4" outright.
I'm looking at possibly replacing the springs on my Comet 20 series driver and have found there are a few different colors to choose from. Mine are old, grimey, and dark. Almost too hard to determine the color. Does anyone have any ideas on how else to tell? It's off of a Pacesetter Trail...
Needed....Comet 20 or 30 series "Tav" set up with metal backing plate. I do not need the aluminum one..due to clearance. It can be new or used. I need one for a 40/41 chain. Worse case I can change it from a 35T if needed. Any help would be appreciated. And yes..this is for a low budget...
I've got one of the new weird B&S OHV engines (I think mine is a 07) it's the weird 1150 series 250ccwith the 3/4" pto. Just wondering if anyone knows how universal that motor is before I start buying parts. Thinking about a mean cam from an animal or WF or something maybe an animal flywheel...
I have a bunch of mini bike stuff along with 2 complete bikes built with treads here on OldMiniBikes that I'll trade for most any Wheel Horse Tractor stuff. If you may be interested contact me at : waltsuz@aol.com.
bunch of motors to trade off also....Regards Walt
I am working on a arco chopper. I have a predator 212 with a Comet Series 30 torque converter. Can I use a jackshaft with the torque converter. Obviously the offset is too much for the final drive. My jackshaft has a 13t input and 18t output to the 62t rear sprocket. On the jackshaft if I...
So i have motors coming and im on to ordering parts for my Dingo.
Im pretty sure i have a Series 40 comet clutch due to the larger pulley being 7.5" across with a red spring. The other pulley that connects to the engine is 5 3/8th". I know it is symmetrical because both sides of the pulleys...
I got a new driver for my comet 40 series to fit a new engine I had. Got the bike running, and now when I rev up at all the driven opens ALL the way, and the belt gets pinched and the TC stalls. The driven shouldn't open that much. Does anyone know why this is happening?
I have a Power Dyne "RAIL" chopper bike and one of the guys here on the forum told me I need the small block HS series engine for my setup cause a lot of motors won't fit ? Or if anyone knows or has of another engine that would be period correct for my setup would be greatly...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.