series

I need a 30 series Comet torque converter with 3/4" driver and 5/8" driven, preferably 6" OD. I have a new unused Comet 44C Magnum that I'd trade for a really good 30 series. It's a 3/4" driver and 5/8" driven and it comes with two belts. I need the 30 because the spring part of the driven is...

it's used but is in good shape no rust... might need to replace a bushing inside the driver but will work as is. comes with driver... driven and belt. only take paypals..65 shipped. the driver fits on a 3/4 crankshaft ..the driven fits on a 5/8 shaft.

On the Comet spring engagment chart they list differant weight types aluminum, zinc, Mod aluminum??. What is the factory original type metal?? I want to up my RPM operating range a little so was thinking of going with a yellow driven and around a 3000 rpm primary. Any suggestions? Thanks Pete

Super Bronc Trike, 30 series Belt Drive

I went to harbor today to get a $94.00 clone and they only had 4 of the blue ones left,they are gearing up for the new predator series of engines ,which will include a 3.5 motor ,also the motors will probabaly go up in price ,some thing to keep in mind if you need a motor,wishful thinking but it...

So I just got my 40 series torque converter in yesterday and when I put the driver on the crankshaft, the crankshaft doesn't stick out the other end. It's 2 inches from sticking out. This is my first time with one of these, and no instructions so I don't mean to sound too noobtastic; but did I...

I gave up on my search for a 3/4" 8hp Tec so I got a 1" 8hp on the way thanx to (jeep4me) :thumbsup: I need a 1" driver. I have a brand new 3/4" driver with less than 30 minutes of run time on it that I will trade. I am looking for close to new as possible PM me :hammer:

I have a comet series 44c driver with series 40d, it shifts up to quickly, I would like to slow it down so the engine can operate in its power range for a longer period of time. I have seen other driven unit with multiple spring holes to tighten or loosen the spring tension. I would imagine that...

I took this motor apart over a year ago. ihave slowly been fixing her up and this evening went to put the clutch back on but something just doesnt look right.....or maybe it does and since i forgot i have no clue.:out: Tech H60 w/ 3/4 shaft and a key way. Salisbury corp 500 series clutch. what...

Looking for a comet 44 series driven unit

Used HPE Muskin CAT 350 and 400 series minibike killswitch plate. Top only, no switch, no clamp. $40.00 Delivered: .

This is my "D" model Powell that my grandfather originally restored for me when i was 11. It has since been torn apart and stripped down. The only pieces it is missing is original clutch and clutch cover (which it never had since ive had it).

I am in need of a comet/gtc 40 series clutch with a 1" bore and 1/4" keyway. the frame I purcashed already has the driven unit attached. Location: Tampa, FL Thanks Karl

Heald Trail Bronc, Snow Engine. 30 series Comet 1" crank, with counter shaft cut off.

Need a comet driven,needs to be 6 inch diameter,5/8 shaft.Needed to make a jackshaft for my trail buck.

so i have a 1970 Rupp Scramber that has the origional driven clutch.. i am unable to find the origonal rupp drive clutch so i read around and someone told me that a comet 20 series works well with the rupp driven clutch. so my questions are: has anyone gotten a TAV drive to work well with...

Used but works perfect ... $140 plus shipping ... (or trade for nice small frame roller) Located in North Texas ... Trail Horse roller will be parted out eventually through ebay (lost interest)

I bought this and at ended up being the wrong length but its unused. Its model number 203791 $15 and can ship for $6 bucks

I have one NOS Comet 20 series symmetrical 3/4" bore driver unit remaining... This one has significant plating blemishes from storage corrosion being buffed off... Blems are cosmetic only, the driver will function 100%...it's ugly, but it'll work fine... No mounting washer/screw...

One new, unused Comet 20 series driven unit with symmetrical sheaves and 5/8" bore... Condition is 100%... $40 plus $11.40 shipping via USPS priority mail... I have only one Comet driven unit, but I can get new 100% condition Salsbury 330 series symmetrical driven units, same size and...