tooth

new 40 tooth sprocket for 40/41 chain 10.00 + shipping

I'm looking for a 40 tooth sprocket, #40/41 chain. Needs to have a three hole bolt pattern, spaced 2 3/8" apart. It's going on my neighbors Columbia mini. I'd like to get a new one, but will consider a nice used one. Thanks!! Pics are of the original sprocket, he wants to stay with the same...

If you have a blank 60 to 66 tooth sprocket blank for #35 chain, then reply and PM me. I'm looking to pay around 15 bucks with shipping.

either that or if anybody has a spare 6 inch rim with a sproket. my hub thing that the sproket goes on is bent. i wasted $20 on a new sproket even though it wasnt the problem :( please help me out. willing to buy wheel for $30. remember, it has to be 66 teeth or less and #35 chain. please help...

I have a brand new never open 52 tooth blank sprocket for a #35 chain. I paid like $30 after shipping, I will let it go for $20 plus shipping. I have pay pal it is rrgruenwald@wowway.com:smile:

This style spocket was used on the 5 inch Azusa "HexStar" rims. $15.00 Delivered. .

There is suppose to be a blizzard on the way so I decide its time to replace the bearings in my driven so I can play in the supposable coming snow. When i bought the Super Bronc it had a new driven installed by who i don't know. But they went the cheap way:doah:Thought it was odd i had play in a...

I am getting ready to install an 80 tooth rear sprocket on my DB and I have two questions for anyone who has done this mod: 1. Will the chainguard still fit? 2. Will I have to add links to the chain or can I get enough chain length by sliding the engine back Thanks!

I plan on putting a H F 6.5 engine on a mini bike I reciently picked up. TSC has 2 clutches available. Masters of Motion 12T 35P Centrifugal Clutch - 5520021 | Tractor Supply Company Masters of Motion 10T 41P Centrifugal Clutch - 552085199 | Tractor Supply Company So what do i need...

I have the 70 tooth and would love a 60 tooth, but don't want to make one. The older Doodlebugs have 65 tooth. Let me know. Thanks, Todd tdishon@hotmail.com

Looking for a 70 tooth sprocket Gardeners in Columbus Ohio has none anyone know any other outlet to get one thanks Dave

heading said it all anyone have a good one for sale

Ok dumy me rebuilt a B&S 3.5 punched out 20 over got a new crank thats 7/8 clutches only come in 5/8 3/4 1" so i guess i need a 1" clutch but it needs to be 15 tooth were would i get a spacer or bushing for this thanks Dave

Hey Guys,I am having a Hell of a time trying to find a 50 tooth or 52 tooth Rear sprocket in a #35. Right no I have 12 60 with a 13 inch tall tire on a 6inch rim. It feels really slow to me. i have a comet clutch and was wondering if I can change out the drive sprocket to a 13 tooth, But I can...

looking for a 72 tooth rear sprocket #35 .......

$20.00 delivered This is an N.O.S. five-bolt, (NOT a standard 6-bolt) #35 sprocket with 60 teeth. Commonly used on Azusa HexStar rims as used on Nova, and Bandit minibike models. They bolt to five sprocket mounting stands on the HexStar rims, bolt them to a steel hub that has five mounting...

New to the formum and have been searching for information on 72 tooth sprocket vs. a 60 tooth sprocket and which would be faster on the top end. Not sure how many teeth my clutch has. What is a fast ratio. This is on a 5 hp Briggs with no jack shaft. I would appreciate the help.

lookin to buy a 50 or 52 tooth rear sprocked for a #35 chain. the sprocket thats flat with 4 holes, any info would help. i can't seem to find 1 any where.

Where are yawl buying your blank 80 tooth rear sprocket,,, andc the max torque clutch,,,,, thanks RD