tooth

Just curious if anyone is running or has tried a skip tooth sprocket on a mini bike? Supposed to be a low drag option, but wonder if it leads to lost chains... WMS Tuck & Run #35 Split, Skip-Tooth Sprocket | 6435** | BMI Karts and Motorocycle Parts

I have two mini bikes and both have 60T rear sprockets. What tooth count clutch should i get? Engine 1: Predator 79cc Engine 2: Predator 99cc

Right now I have installed on my motovox a 212cc predator with 14 inch tire diameter, 12 tooth clutch and 58 tooth rear sprocket. Will it be okay to switch the clutch to a 13 tooth and the rear sprocket to a 53 tooth without burning up the clutch?

Have had this stored for many years. It is a 30 tooth #35 chain 1st gear. Has the bearing support, keyed for a 5/8 shaft. Mounts to shaft with a roll pin. Maybe fox or ??? 58.00 shipped. Postal money order only please. Regards, Joe51

Hi, Does anyone have any idea where to purchase a plain 70-72 tooth 420 sprocket with no holes? I plan on boring one and drilling out the mounting holes for my CT200U project. I am going with a stage 1 on a H.F. 6.5 212cc Hemi with a TAV 10 tooth driver. Thank you~ Stitch

Looking for 6" GoPower wheel 72? tooth sprocket and brake assembly! If I can't find them the wheels are available.

Here is a brand new Manco 60 tooth #35 chain steel sprocket with the Manco adapter. The adapter was cracked and rewelded. It is ugly, but solid! Will not effect its function. $45.00 shipped, lower 48 only, or trade for beef jerky, canned fish, size 11 tennis shoes, or anything interesting...

I'm looking for a Bonanza 60 tooth sprocket with a #35 chain 3/8" pitch.

I'm looking for a Bonanza 60 tooth sprocket with a #35 chain 3/8" pitch.

29.99 each - shipped pictures are of both sides, slight signs of use, straight and true payment through paypal, thanks :thumbsup:

Up for sale I have a NOS 30 Tooth 1st gear for a 2 speed trans setup.Don't know the original application for this,but this could be used for a Lil Indian or other setups.This has the one direction bearing in it and a Hardened internal sleeve that fits a 5/8 shaft.No hardened shaft is needed as...

As the title says looking for a 14 or 15 Tooth #35 pitch Vintage Clutch. Preferrably NOS. Please PM me. Paypal preferred. Thanks in advance :thumbsup:

Pulled this old clutch off from a vintage snow blower. Looks to be in great condition. 3/4" bore, #40 pitch. Comes with shaft collar. Asking $50 shipped. PayPal preferred (as a friend or include the fees), USPS money order or cash work too.

In need of a 72 tooth rear sprocket for a 68 tt500. It can be used, just has to have teeth in good condition.

Alright so I need a new rear sprocket and I'm switching for #35 to #41. Question is I'm currently running a 13" rear tire 3600rpm motor tav with a 12t 60t rear at 31 mph. I have a ton of torque which iI like with the terrain I ride on. So I'm switchingtto a 10t on the torque converter hoe...

I'm in the market for a good used 12 or 13 tooth Max-torque sprocket, 3/4 shaft #35 chain. Let me know if you have one laying around. Thanks, Jerry...

4.10x3.50x4 saw Tooth tire (no brand name) Tread isn't bad. Asking $5

Want whats in the title. 35 chain. Thanks!

I see what looks like the same one advertised on ebay but says 40 or 41 chain. https://www.OldMiniBikes.com/Steel-Sprocket-60-Tooth-41-Chain.html?category_id=1317 Sprocket 60 Tooth 40 41 Chain Mini Bike Go Cart Go Kart | eBay Thanks Kevin

I was just playing around with one of the top speed calculators and I bought a torque converter kit for my 212 predator I put in a go kart which is strictly got off road use, and the kit came with a 10 tooth and a 12 tooth sprocket, my axle has a 60 tooth on it and I went with the 10 tooth for...