This poor thing just keeps getting kicked around the shop and never finished. At this point all it really needs is some final adjustments, and throttle linkage/possible carb replacement to actually go. I got a tilly for it, but it needs rebuilt and may not be the optimum size, I do have the...
I saw the recent thread on ills with Tecky carbs.
Anyone found that Walbro carbs run any better?
I still have idle jet clogging problems with them
with the ethenol gas these days, but they seem
less trouble than the Tecumseh carbs. Any one
see this also?
-Doozer
A friend of mine is looking for a Walbro SDC-80 carb, he is into RC planes and helicopters and this carb came on some weedeaters and chainsaws. i know some of you guys are into RC stuff and have good luck finding this stuff at junk yards and scrap yards.
Up for sale is a real nice Tillotson HL-388B carburetor. This particular carburetor is set-up for a gasoline application. It has a .790" venturi and 1.000" throttle bore. The carb's mounting flange bolt holes measure 1 13/16" center to center. Air filter adapter holes measure 1 5/8" center to...
I bought this for a Briggs Animal engine thinking it was a gas carb but it's set up for alcohol. Nice and clean inside. It has a #38 pilot jet and a #137 main jet. It also has the alcohol needle in it. Could use a new bowl gasket. Price is $75.00 + $8.00 shipping. Paypal only ! Thanks Ed
I need a Briggs Animal Walbro PZ 22 carb. Must be for a Briggs Animal and not one made for a scooter. PM me with what you have and the price. I have a real nice Tillotson HL 365b gas carb I could trade or pay cash.
Thanks Ed
been having a problem with my walbro fuel pump.. fuel leaks out of the top vent hole and no gas will get to the carb.. I don't know what's wrong
when I say leaks I mean there's a steady stream of gas flowing out if gas tank is filled and the leak dies down when there's not as much gas in the...
I have an old chinese pit bike, 70cc, and I just went to check on the carb, thinking I can maybe use it on my predator engine thats on its way.
Just wondering if anyone has any experience with a walbro PK. according to the walbrom manual, they came in 26mm and 22mm. this is more than likely a...
Does anyone have a manual or a link to one for the WD carb used on the RTS Trisports? I've found some exploded views but was hoping for a complete manual if possible. It has WD-36 on the carb flange. Thanks
The square type is being discontinued, here's the one that's taking it's place. I'm glad they got rid of those two annoying studs that were on the bottom of the square version. :doah:
Made in Mexico is better than made in China I suppose. :shrug:
I got this carburetor a while ago and had to get some parts for the throttle linkage.
Although it's small, it's quite an extreme carburetor.
1.100" Throttle Bore & 1.020" Venturi & Requires Fuel Pump
Snapped some photos of the Test Fit/Mock-up.
Only problems were the throttle plate...
Just hooked everything up. Not getting fuel to carb. The fuel won't even come out the exit nipple on the pump. Tried manually choking carb by holding my hand over velocity stack still no delivery. Any ideas?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.