wrong

Just been a visitor for a long time. First time I ask a question I get denied. There were no URL's or forbidden works. What is wrong with my posts. 'drif

After a few weeks of bothering people on here I think I am ready to order parts and begin. Goal is to end up with a Tote Gote type able to carry two adults or one adult and 1/2 an elk. So a 400 lb payload. No tubing bender so using rect tubing. Getting inspired from the frame of the Trail Buck...

After a few weeks of bothering people on here I think I am ready to order parts and begin. Goal is to end up with a Tote Gote type able to carry two adults or one adult and 1/2 an elk. So a 400 lb payload. No tubing bender so using rect tubing. Getting inspired from the frame of the Trail Buck...

I am not sure what model this is. Any thoughts would be greatly appreciated..

Well I ordered what I thought were ACR HP valve retainers but what I got were the black extreme duel spring retainers. Some of these parts company's are too vague. The order form says ACR HP retainers and the picture is of nice aluminum looking pieces but it also dose not say if there for single...

LMAO!!!! I love seeing these idiots and their adds. Going through and reading sale posts like this cracks me up. Do you think the seller is the crook? Or the guy that supposedly sold it to him? If you go to the bottom off the page and read the one question asked...it really made me crack up...

Curious about others solutions to my issue. A bike I recently got has bad tire rub against the upper spring cup on the front suspension. There are many ways to go here... but I'd rather not replace the tires. Thanks

I have predator 212 hemi.installed, billet rod, f275cam, ss valves, no governor, flat top piston, stock head milled .050, 1.2 roller rockers. Cmpush rods right length, 24mm mikuni carb, performance exhaust, 10t torque converter, 36 tooth rear sprocket. Top speed 37mph engine sounds great that...

.. but it has the coveted "brake apparatus" .. New Chain!! MINI BIKE

I know that Cheeftah and Stellar both made bikes that pivoted here, but they both pivot in the wrong place. The forks look wrong too.

Why am I having such a hard time uploading my pictures? Could somebody possibly point me in the right direction here? I tried my self, then my wife tried. If she can't do it, something's wrong! Who Do I contact on OldMiniBikes to help with this? Would really like to show everyone here what I'm doing with...

Old MINI BIKE . It looks like it has a Cat-like engine plate, so I figured maybe it was a Nova, but the axle tabs are wrong. That funky jackshaft gear is interesting. Where are Markus and Simpletom? They'll probably be able to ID it without a problem

Reminds me of a MTD but Im probably wrong

I bought a new max torque clutch, oiled it and put on bike. It squeals and screeches when engaged. I checked the chains and all is good there. Everything is lined up properly. What do you think is wrong?

https://www.youtube.com/watch?v=ql7hz1MV7kAhttps://www.youtube.com/watch?v=ql7hz1MV7kA

Anybody got a seat for an mbx10 laying around? I picked up a bike this past weekend and it has the wrong seat. Any condition, just need a cheap seat. Thanks

Help me out here, I know it has the wrong engine, but what is it? Thanks

Hello everyone. I have a 212old style. Getting ready to order parts, im taking out my governor so I'm going to get a fly wheel rod a cam new springs push rod lifters and maybe rockers. The only thing is I don't know which to get. They all have different specs and I don't want to get the wrong...

This will make those of you who like both vintage tools and vintage small engines ill. Dick! https://runningwithpowertools.wordpress.com/2013/06/27/fueltank-crab-hermit-carb/

Well I'm stuck inside and bored so I made a logo......and put it on my body Lmao. Hopefully I'm not in a sling for using the OldMiniBikes logo as part of it.....didn't see a copy right but you never know what might rub someone the wrong way. So rather then keep it a secret and show up to an event...