1. C

    WTB- Sebac Parts

    Lower tapered tube and mount for 11.75" shock needed. Also look'n to buy NOS or excellent/used pairs.
  2. S

    WTB- Fox exhaust, caliper, anything else

    WTB, Caliper, exhaust for bike pictured
  3. C

    WTB- Crankshaft Drill & Tap Guide

    3/4 version. Purchase or rent as I will never use it after this engine.
  4. C

    WTB- Sebac Shocks/12in

    Anything off a Gilson, Wards, AC or possible others w/12" eye-to-eye dim..
  5. C

    WTB- Taylor Model #100 for HS40

    PM a photo of what you have to offer.
  6. C

    WTB- Gilson/Wards Survivor

    Looking to add another complete Gilson or rebrand: Gilson 180, 185, 700, 701, 13966A, 13976A, 13977A Wards 323, 424 Complete or near-complete examples only. Top money paid for unrestored w/OE engine running or not. Must be able to disassemble/box on your end and transport to a FedEX...
  7. C

    WTB- Mesinger Seat

    Looking for Mesinger, in black, 13~18" in length.
  8. C

    WTB- Gilson Bushings

    Pair of 0.75" ID, oval OD bushings needed.
  9. T

    WTB- 12mm X 342mm or bigger BOLT.

    Does anyone have a 12mm X 13.5" or longer bolt? Must be 12mm
  10. L

    Wtb- bonanza parts for rebuild

    Well, spent some time looking for a minibike frame and ended up with three. 2 bonanza 1000 frames and an unknown tacoish bike. Problem is they are bare and I'm looking to at least just make one complete bike. Would love a set of round go power wheels, a seat, brake, sprocket, clutch, and...
  11. prime mover

    WTB- Bonanza sprocket

    I need a sprocket for 5" brake that will fit Azusa spinner. I got the last one from Evil(thanks again) and now building an MX too.
  12. B

    WTB- Rupp Dart/ Chevy Jr. parts

    Basically, I need everything except the body. Looking for original type used on 60's Rupp Chevy Jr. Need Tecumseh H35 engine as well.
  13. Scottessey

    WTB- Old school throttle

    Hey Fellas, I'm looking for a throttle and/or grips like this one. Thanks! :thumbsup:
  14. stubbymonster

    wtb- kawasaki coyote

    looking for a tank for my bike. Does anyone have one? Thanks
  15. B

    WTB- DB30 rear wheel assembly

    I need a complete rear wheel assembly for a project I'm working on. Thanks
  16. Scottessey

    WTB- Tec steel tank and bracket for an HS40

    I'm looking for a steel tank and tank bracket for an HS40 like the one in the picture below on the red Trailbug. Preferably, a dent free one. :smile: Also, Here's a pic of the engine I'd like to put it on after I swap intakes. Thanks fellas! :thumbsup:
  17. Hothead79

    WTB- old rotary snowmobile engine

    Im looking to buy an old rotary snowmobile engine if anyone possibily has one.