1968 Lil Indian Outlaw Chopper Project

#1
Passing this one along. Purchased from OldMiniBikes member "MINI-MATIC". What you see is what's included. $525.00 plus exact shipping. Add 3% for PayPal or use PayPal "gift" option. Cash, check {must clear}, U.S. Postal M/O is fine. Here's info from MINI-MATIC's description... Rare NOS Lil Indian Outlaw Chopper Frame. The interesting story is that it was never built up because most of the items welded to the frame like the engine plate, misc brackets etc., were welded crooked, or out of position. I started the restoration, removing the engine plate etc., so this is a project. To give you a rundown on the frame, when I purchased it, the frame, fork, and seat frame were included. I paid somewhere around $400.00 for this alone. I since located a correct NOS sissy bar, very hard to find used handle bars, correct easy to find NOS rear tire and next to impossible to find front tire, not NOS, but in great condition. Both General's. Also 4 wheel halves,a set of foot pegs, and as close to original rubber foot peg covers. The engine block is off a Lil Indian model 600, so it's about as correct as you could possibly get for this bike. Also a set of partially restored correct shocks. The frame is still coated with the original black primer that Lil Indian used. The forks are bare and were not primed, this was common with the Lil Indians, as I have seen a few other bikes this same way. The engine plate needs to be rewelded on. There are a few other brackets, like the seat base that still has a bracket to mount the seat to that you can see is not straight. It could be left alone, or cut and repositioned. This is about the rarest Lil Indian that you can get, very few still exist."
 
Last edited:
Top