So, I have all my parts for my clone to include
The s2 adjustable pushrods
.065 milled head and ported (gx 160 head on 200 clone block)
1.3 roller rockers
.290 lift cam from agk
28.5 intake valve 26 exhaust
Flat top piston
Stock length billet rod
26# springs
26mm mikuni carb
Norma cheetah clutch
My main question is how do I know what to adjust my pushrods to?
Also, how well will this set up work? What should I change if anything? approximate hp?
I will be back home in December and just trying to get all my information before I start...
The s2 adjustable pushrods
.065 milled head and ported (gx 160 head on 200 clone block)
1.3 roller rockers
.290 lift cam from agk
28.5 intake valve 26 exhaust
Flat top piston
Stock length billet rod
26# springs
26mm mikuni carb
Norma cheetah clutch
My main question is how do I know what to adjust my pushrods to?
Also, how well will this set up work? What should I change if anything? approximate hp?
I will be back home in December and just trying to get all my information before I start...