Bonanza BC1500 Swing Arm Question

bigevilone2

bigevilone2

#4
#4
There are about 2 or 3 different swing arms widths. Everyone claims there swing arms fit BC 1300. If I remember correctly the MX swing arm looks like the BC 1300 but it is narrower. Just measure the width in between your jack shaft plates and have the seller measure his swing arm with the bushings in it and it should be the same width you came up with.
 
george3

george3

Active Member
#7
#7
bigevilone2 said:
There are about 2 or 3 different swing arms widths. Everyone claims there swing arms fit BC 1300. If I remember correctly the MX swing arm looks like the BC 1300 but it is narrower. Just measure the width in between your jack shaft plates and have the seller measure his swing arm with the bushings in it and it should be the same width you came up with.
Click to expand...
at least 3 different ones. the early bonanza ( front foot peg ) are a bit thinner in width. The 1969 and later are wider. the so called 1500 would prob. fit the later mid frame foot peg bike. They also made a longer swing arm that fits the later bonanzas. good luck on that swing arm.
 
You must log in or register to reply here.
Top