Carbs

[gumpit]

What is the clone equivalent to say a Mikuni 26mm? Wasn't someone selling a hooped up clone carb for modded engines?

 

[cheezy1]

GX390 carb is about a 21mm

 

[trinik7597]

Holey Moses GX 390 Carburetor

 

[Rufus Hugo]

Thanks for the link, I didn't know of them!

 

[gumpit]

So the Gx390 carb for the 212cc Predator?

 

[minibikin']

I've said it over and over again, if you want the best carb from a stock casting, Dover Power is the guy in my opinion.


Sent from my Texas Instruments Speak and Spell...[emoji2]

 

[OND]

X3 Jerry and Melvin at Dover Power....some of the best carb builders around.

 

[gumpit]

But which carb for a modified Predator 212cc. Does the 390 bolt up to it?

 

[gumpit]

I want to try one on the Box Stock one... (Still feels stock) and a Predator I just had built

 

[trinik7597]

you need an adapter manifold .. and the predator and honda intake ports are the same thing .. maybe some port matching would be in order if you are really going for performance . and throttle hook up can be a little tricky but i think you are running a top plate right ?? barry young made almost 30 hp with a 390 carb in the engine builders challenge pretty damn impressive ..

 

[OND]

Heres a thread Randy...adapters from NR racing and I think ARC still makes them...or maybe David Wolf. Hope this helps.

http://www.oldminibikes.com/forum/h...7-gx390-carb-predator-212-throttle-setup.html


6878 ARC Carb. Adapter GX390 to GX200 - ARC Racing

 

[trinik7597]

eric is right nr has them not sure about arc and dover has them as well on the right side of the page of the link i posted ..

 

[gumpit]

Ok. Which of the 3 versions. Stock,super stock or the other one?

 

[minibikin']

Ok. Which of the 3 versions. Stock,super stock or the other one?

I would call them with your engine info....


Sent from my Texas Instruments Speak and Spell...[emoji2]

 

[gumpit]

I would if I knew it..lol

 

[massacre]

Just go medium? That's what I'd do.

 

[OND]

SHIPPING DEPT is closed until Tuesday March 15th Due to us being at Swap Meets This weekend out of state... Orders will be shipped in the order they are received come Tuesday.

Randy its the beginning of kart season right, and there is a post up that they will be at swap meets till March 15.

Phone number is at the bottom of there website page.

 

[trinik7597]

704-782-7061 and I would say supper stock but tell them what you have and they will help !!

 

[trinik7597]

Throttle hook up is a little tricky I would ask a couple questions about that too while you have them on the phone

 

[trinik7597]

Damn Eric you are fast !!! Lol