Chain adjuster eyelet for Bonanza

[Midyrman]

Not sure I got the name correct but I need one but would consider a pair.

This is the adjuster "bolt" with two nuts that attaches to the swing arm and slips through the rear axle bolt.

Prefer one with original large nuts.

Thanks

Tom

 

[chipper]

Not sure I got the name correct but I need one but would consider a pair.

This is the adjuster "bolt" with two nuts that attaches to the swing arm and slips through the rear axle bolt.

Prefer one with original large nuts.

Thanks

Tom

any small motorcycle ones will work , just have to drill them out to 5/8" , ebay a set , I used a pair off a Yamaha PW 80 !

 

[gbabins1]

I ended up making my own. They work well although not original by any means.

 

[Midyrman]

Thanks for the suggestions. Still holding out hope for an original one.

 

[minikenny]

I'm sure you can get them from Dave Miller for about $20 a piece. Short of that, a common 5/16" eye bolt from the hardware store is awfully close to the original part.

 

[Ajf]

Tom,
I have an original one with original nuts. I'll send it out Saturday morning.

 

[Midyrman]

Tom,
I have an original one with original nuts. I'll send it out Saturday morning.

Thanks Aaron.