Correct axle for Bonanza bc1300

[adiel]

Does anyone know the correct axle for a Bonanza bc1300 (front and rear). :shrug:

This is from the Azusa catalog:

Thanks,
Adiel

 

[Jeff Clark]

Adiel,
Mine are all bolts my swing arm and non swing bikes, If you like I can get dims tonight im sure other members might just know, where is the evil guy he should know :smile:

 

[adiel]

Jeff thanks that would be great. :drinkup:

 

[owend]

Adiel, I have some that were off of a 1300 project that I did not use.Two fronts and one rear and some spacers. If you need it, I have a rear Kidney Bean that can be used for the front or rear of your bike.P.M. if you need anything. Thanks, Owen

 

[adiel]

Owen, sent you a message. :thumbsup:

 

[Quickdraw]

Owen, sent you a message. :thumbsup:

mine are 5/8 and about 9 inches, so the 8 3/4 should work, mine stick out about an inch on each side. if you go with 10 and 2, you can cut off excess