correct

Hi all, How do I tell if the H35-45348H 1971 Green Rupp Scrambler engine I am working on has the correct block? Thanks, Bill T.

I understand that ordering drivetrain parts can be a complex affair that's why I carefully read the discription and ask questions before ordering but on 3 resent orders the parts were just wrong and at that point you need to take pictures send a email to the seller then start a return and be...

Front bracket appears to be 5/16". Rear threaded on brake arm appears to be #12x24. 56" cable. Clark cyclone. Is there a close match to original brake cable available?

Hello Folks, I am not finding the original carburetor that my hs40 had on it before someone replaced it with a 'bulb' primer model....:doah: I see all sorts of stuff out there available for hs40's, I just don't know how to determine which would be best for mini bike application. What is the...

I was too lazy to find the right size wrench to tighten the forks on my students Trail Horse before I painted it and the wrench slipped off and I punched myself in the nose. Stupid!!!

Just as the title says Wanted correct chain guard for a Bonanza MB 1210 TC Top money paid or trades Robertt8883

I ordered a set of gaskets for a greyhound HF 6.5 (about 7 year old blue clone greyhound) and found they didn't fit both the side crankcase (see pic) and valve cover (mine has 5 bolts (set for 200cc Honda clone has 4 bolts). The set I ordered was listed as a gasket set for the 196-212 cc engine...

Just checking to make sure I am not making a mistake on my compression. I am wondering if some one else can verify my calculation of my compression is correct. I am using a compression calculator for the math here. I am going to be building a 196 clone motor for a mini bike. I calculated the...

Hi getting ready to get several Bonanza mini bikes powder coated.I do not want to have these painted. Does anyone have the correct ( Prismatic) powder coat color for this match. https://www.prismaticpowders.com/powder-coating-colors/ Thanks Robertt8883

Has compression, haven't tested it to see if it runs or not. Paint isn't original, but it's in very nice shape. No rust. $250 obo plus shipping.

Forks seem to be in good shape may be a bit loose in the lowers but most are the chrome on the springs is OK for a rider. Clamps are in good shape other than the chrome which is a bit rough. No bars. PM me for pics or I'll post em in a week per the rules should they last that long. Will take...

I have a solid fork roper with a dented gas tank for sale, tank is dented but can be fixed or you can replace it. Was a disc brake bike, you can buy a disc that can be modified to fit or bolt on a band brake rotor and use a band. I have the correct wheels with the disc brake mount for the bike...

Could someone post a photo of the correct kickstand that would have came factory on a manco trailcat.

I heard or read somewhere that a torque converter needs an occasion lubing. IIRC the inside of the brass fitting on the drive shaft, and also the inside of the TC cover. It said to use a dry molly. I went to a few auto parts stores and no one heard of such a thing. Does the TC really need...

Can anyone help me by posting a picture of the correct levers that go on a broncco tx-1? I need close up photos and not from a distance, there are plenty of those online lol. Any info is greatly appreciated :) Thanks!

Wanted: Cat 300X in nice condition, complete and correct. No tweaks on forks. Thanks in advance.

Just about to repaint my 66 h40 and I was wondering which decals, flag or ballon? Which is correct for that year engine. Thanks

I just got this cheeftah and I noticed that the fenders seem to be indented on the sides, looks factory but don't know why? Both front and rear are the same way

Just got a used Tecumseh HS40-55388C with Lighting for a Rupp Roadster restoration and have a few basic questions. What oil did Rupp say to use in this engine? What oil should I use in it in the Northeast in warmer weather; say 50-95 degrees? With no gas tank ready for it yet is there a...

The condenser in my HS40 us badly rusted so I wanted to replace it. Visually, it appears that a number 29177 may be correct, but I also have a similar condenser that is about two-thirds the length of the original or the 29177. Two questions: 1) which condenser is correct? 2) does the...