H35 runs out of power top end

[Havasu Dave]

The small print from yesterday. :laugh:

Try two or three holes down from the top on the spring.

The manual is available for down load free in PDF. I use it quite a bit.

 

[JohnnyTillotson]

Try opening the high speed jet on the bottom of the float bowl. CW turn of 1/4 to 1/2 and see what it delivers... You can always turn it back.

That's what I was thinkin.

 

[JohnnyTillotson]

Good thing it just hit the wheel and it went on its side. What a rush. Hahah... Problem is solved. :thumbsup:

I thought taking off wasn't the issue but top end was? Surely that projectile didn't reach top end on its way to the side of the car? LOL

 

[Jrturbo]

Well when I moved the spring it moved lever to open up the butterfly of the carb. So that's why it took off.

 

[Jrturbo]

It's got a diaphragm carb, working good now.