h35

Hello, I am Nash Benson I am a young adult trying to rebuilt what I believe to be a H35 Tecumseh with solid state ignition, I believe its a H35 (Specifically a H35-45619T) for that's what the cover had on it and it has a 2.5 in bore. Possibly an H35 I have heard that H35's are side poppers...

Ok so I picked this up and prolly way over paid. But I have been wanting one for ever and I’m debating on a full restoration. Or just spray paint it and restomod it. The number on the back drop out is hard to make out they put the paint on thick on this one, as in the last owner but I think it...

I've recently acquired this Tecumseh H35 and was wondering what year it is. I know the serial number tells you the date on it but not sure how it's outlined on a Tecumseh. I appreciate any help I can receive. Thanks!

So...I'm in the process of building my HS50 5hp engine. I have seen that the OHH50 billet rod fits the HS50. Today I acquired an H35 Power Sport 3.5hp and opened it up. I realized that the crank cases for both engines are identical. In fact, the side cover gasket I bought for the 50 is the same...

Hi all, Will a crankshaft out of a Tecumseh HS40 work in a H35? Both came out of Rupp min bikes. Thanks, Bill T

Hi all, I am trying to rebuild my 1971 Tecumseh H35-45348H engine. Upon taking it apart I found the flywheel was loose on the crankshaft damaging both the crank keyway and flywheel. Some years ago I purchased what was supposed to be a NOS Rupp H35 crank. I pulled it off the shelf and looked...

WTB: 33085 crankshaft and 30756B cover plate for a Tecumseh H35-45348H 3.5 hp engine that will be used on a 1971 Rupp Scrambler. Thanks, Bill T.

Hi All, I am in the process of restoring 2 Rupp minibikes I purchased a few years ago. A purple Rupp Roadster II with original title and a Green Scrambler. Focusing on the Green Scrambler with a Tecumseh H35-45348H engine. Step one will be to obtain an exploded parts list, showing Rupp...

Looking for a complete and running 1973 H35 Tecumseh engine. Has to be off a mini bike. Thanks.

I have the Original Tecumseh 3.5hp that can off the Murray Track 2. I would like to rebuild and make a sweet little street mini bike with it. I am wondering what sort of performance I can get out of it? Looking to build a frame similar to this below. Parameters: Street bike only Looking for...

Wanted: Intake for an H35. It doesn't have to be pretty, just pretty cheap :-) Danford1

I just picked up a Murray Track 2 built 2001 or so. It looks like new. The person I got it from said he and his 13 year old son had rebuilt the carb recently because it had been sitting. It would only idle for me with the idle turned up and was surging a bit as accelerating and at top rpm till...

Im doing a complete restoration on a 1968 sears wren minibike. This is a tribute build to my life long best friend who died 2 yrs ago of brain cancer. He had one new and would let me ride it despite his parents stern warning not to let any of the neighborhood kids ride it. Ive got the frame and...

I have an Aspera HT35 from the 1960's/1970's which for all intents and purposes is the same as an H35. I recently got an H35 lighting coil from an OldMiniBikes member and the flywheel rubs against the coil. Question is: are the flywheels on the lighted H35 engines different than the flywheels on the...

Even the losers get lucky sometimes. I was at an auto swap meet and spotted this early Tec holding a trailer door open. I got it for $20! I didn't know if it would be a parts motor or a runner, but knew it was out of a mini bike. The guy told me came out of a Golden Pinto that he had at home...

Hi guys, does anyone know if an HS40 lighting coil will fit/work on an H35? Thanks.

Unfortunately the original carb on my 1972 DMP Scamper with the TEC H35 engine is shot. Someone over tightened the LS needle and broke off the metering tip of the needle in the carb body :censure: I hear no check ball rattle when I shake the carb body and the throttle shaft has a good amount...

I need an ID tag for a 1970 H35 that got ruined during paint stripping process trying to remove some really tough paint!! Off a side popper is fine, will buy or I have other tags to trade, 1970 HS40 tag 1967 and 1968 H35, 1969 and 1972 H25 or other parts possibly worth about $35 :shrug: Thanks