Heald VT-24

[Andrewgcraig]

Machined fill nozzle for the fuel tank

 

[Andrewgcraig]

Jackshaft caliper mounted

 

[buckeye]

Nice work.

 

[Andrewgcraig]

Brake and drive sprocket

 

[Andrewgcraig]

About 1/8" clearance between frame and caliper

 

[Andrewgcraig]

Intake, sheet metal built onto the stock Honda

Single TM 38 flat slide carb

 

[Andrewgcraig]

Intake bottom

 

[Andrewgcraig]

Seat pan/fuel tank on frame. I hate to cover it with foam and a cover. The fill will be rear center and a shallow sump built under the large hole

 

[Andrewgcraig]

 

[Andrewgcraig]

Had crank cut and tapered 25 degrees to match the comet 780 driver. 0.30 over Pistons, .050 off the heads and valves ground. Keeping the compression reasonable to keep the starter alive....hopefully I can make progress next weekend