I have a lot of mini bike parts, engines, and 3 bikes that I would like to sell together. Pick up only in Amelia, Ohio, about 20 minutes east of Cincinnati. I am thinning my herd due to moving and do not have time to part this lot out.
I believe the first mini bike is a sears roper with a comet 2 speed jackshaft. Needs double sprocket clutch and chain. Has a Tecumseh H60 motor on it. Unknown motor condition. Bike in total is mostly complete. I have seen no rewelds or bends in the frame.
View attachment 61575
2nd Mini Bike- Thunderbird (from what I can tell) with B&S 3 hp engine that needs carb work. Needs clutch and chain to complete bike. Nice bike, some rewelds on the forks.
View attachment 61576
3rd Mini Bike- Unknown make. Runs good and has a built Honda clone motor on it with an aluminum fly wheel & rod, Mikuni carb, cheetah racing clutch by norman, aftermarket cam, and a good bit more. I am not sure what all is done to this bike, but it is very fast. The only real problem with this bike is that the side cover gasket needs replaced, it leaks oil. Aluminum rims.
View attachment 61577
There is a bin full of Honda clone parts. Mostly all stock parts.
There are also a few Honda clone aftermarket performance parts too. Including a new tilloston carb part #334WX with intake manifold for clone motor, throttle hook up, and velocity stack. Also there is a cam, I was told it was bigger than stock, but am not sure about it, the only # I can find on it is 10-12-28. ARC top plate with fuel pump part # DJ-1147. There are also a few other miscellaneous after market performance parts.
There are 3 briggs and Stratton engines. Engine#1 is a 3hp with straight pipe. I used this motor so I know it used to run, but I have not messed with it in a long time. Engine #2 is another 3hp missing carb and exhaust. Engine #3 is a 187cc, looks complete but have not messed with it.
Also, 3 aluminum carting rims in nice shape, but the tires are shot.
For this whole lot, I am asking $800. I believe this is a fair price. I would not be selling them if I weren't moving and didn't have other projects to complete.
I do accept paypal but charge an extra 3% or cash on pickup. If you're interested, I would be more than willing to show you the lot.
Thanks for your time!
I believe the first mini bike is a sears roper with a comet 2 speed jackshaft. Needs double sprocket clutch and chain. Has a Tecumseh H60 motor on it. Unknown motor condition. Bike in total is mostly complete. I have seen no rewelds or bends in the frame.
View attachment 61575
2nd Mini Bike- Thunderbird (from what I can tell) with B&S 3 hp engine that needs carb work. Needs clutch and chain to complete bike. Nice bike, some rewelds on the forks.
View attachment 61576
3rd Mini Bike- Unknown make. Runs good and has a built Honda clone motor on it with an aluminum fly wheel & rod, Mikuni carb, cheetah racing clutch by norman, aftermarket cam, and a good bit more. I am not sure what all is done to this bike, but it is very fast. The only real problem with this bike is that the side cover gasket needs replaced, it leaks oil. Aluminum rims.
View attachment 61577
There is a bin full of Honda clone parts. Mostly all stock parts.
There are also a few Honda clone aftermarket performance parts too. Including a new tilloston carb part #334WX with intake manifold for clone motor, throttle hook up, and velocity stack. Also there is a cam, I was told it was bigger than stock, but am not sure about it, the only # I can find on it is 10-12-28. ARC top plate with fuel pump part # DJ-1147. There are also a few other miscellaneous after market performance parts.
There are 3 briggs and Stratton engines. Engine#1 is a 3hp with straight pipe. I used this motor so I know it used to run, but I have not messed with it in a long time. Engine #2 is another 3hp missing carb and exhaust. Engine #3 is a 187cc, looks complete but have not messed with it.
Also, 3 aluminum carting rims in nice shape, but the tires are shot.
For this whole lot, I am asking $800. I believe this is a fair price. I would not be selling them if I weren't moving and didn't have other projects to complete.
I do accept paypal but charge an extra 3% or cash on pickup. If you're interested, I would be more than willing to show you the lot.
Thanks for your time!
Last edited: